Showing posts with label rc car battery. Show all posts
Showing posts with label rc car battery. Show all posts

Monday, September 1, 2014

Escort Solo S2 Cordless Radar and Laser Detector

Escort Solo S2 Cordless Radar and Laser Detector
  • Convenient cordless design uses two AA batteries
  • Provides extreme long-range warning on all radar bands, including X, K, SuperWide Ka, and instant-on POP mode, along with 360-degree laser protection
  • Brilliant high-resolution LCD with LED backlight
  • Advanced EZ-Programming lets you customize up to 10 features
  • Exclusive AutoSensitivity intelligently filters out annoying false alarms

Stage: I live in a city of approximately 100K and drive roughly 5 miles to work daily through commercially-populated areas. The daily on-time of my S2 is approximately 45 minutes. I take 1-3 200+ mile round-trip interstate trips once per month. The detector is on continuously at all times while driving. Have owned the S2 for > two years. Before that, owned an 8500 for two years. Before that, used Bells and Cobras.

Battery Life: 2 AAs last me approximately two months. That's 12 AAs per year, or in bulk, approximately $12/yr or $1/mo. Having used a corded 8500 for a couple of years (which I loved) and having power supply failures due to cord fatigue, not having to deal with a cord is worth it, BAR NONE.

Sensitivity: This device is, in my opinion, just as good as the corded Passport models. Scientific tests will refute that, but real-world usage will not. I was worried by an article that said "battery-operated detectors 'sleep' between cycles so are therefore less effective" but in real-world conditions, I do not think this is an issue: the 'sleep' time, if any, is a non-issue.

Controls: I have large hands and fingers. Even so, this device is crisp to use. Navigation of settings, should you decide to change the out-of-box defaults, is simple and straight-forward.

Overall: Nothing compares. No cords. Battery life to cost ratio for such is a non-issue. Real-world sensitivity beyond actual need. No questions asked, the best deal out there for a radar detector, period.

Buy Escort Solo S2 Cordless Radar and Laser Detector Now

The detection capabilities of this unit are great. I got the S2 a couple years ago so I could use it both on batteries on a motorcycle and plugged in in a car. It works wonderfully in both places, except that the batteries jiggled loose due to the bike's vibration. Solved that by shimming them with a spare foam earplug.

However, much more serious, is the display. About two years ago, I had to send my S2 back to Escort, under warrantee, due to a patch of dead pixels. They replaced the display.

About a year ago, now out of warrantee, I noticed a patch of dead pixels again, and it's growing. Also, the the contrast is decaying to the point where it's nigh-impossible to read during the day, and it is impossible to read at all for the first 20 minutes or so when the temperature is above 80 degrees (Fahrenheit). Maybe the newer units have a better display.

Read Best Reviews of Escort Solo S2 Cordless Radar and Laser Detector Here

I have had the S2 for over a year now. I have also owned both the V1 and passport 9500i.

All had things I liked and disliked. This is my list on the Solo. I am listing them in order of importance to me.

Like:

-Cordless means a nice clean look in the car and since you generally need to hide this if your parked in public its nice to be able to just slide it off and stash it. The real plus is when your putting it back up you do not have to plug the power cord into it.

-Display-Doesn't light up the whole car at night when it goes off (like the V1).

-Battery Life-I go about 3 to 4 weeks with Eneloop low discharge rechargables. This was about a week longer than i was getting with throw away batteries.

Dislike:

-Range-its not even close to the 9500 or V1. If the radar is over a hill its near zero. If its around a bend you need to slow down immediately. Many times the warning has only provided 2 or 3 seconds to slow down. If the radar is over a hill and they are using instant on then hide your detector and ask for a break as this unit is just not sensitive enough to pick up a zap from an earlier car ahead of you. When this unit goes off hit the brakes. I have often visually seen the police car before this unit goes off if they are in front of me in traffic. This never happened with the 9500 or V1.

-Volume-with the music turned up to a good listening level you can't hear the alert and the display doesn't stand out being basicly just lcd that you really need the audio alert to be louder.

-windshield mount, suction cups wear out fairly quick. They have a better mount but the one that comes with it is good when the cups are ok but once they stop working thats generally it. A minor issue.

Summary:

If you cannot live with a corded model this is by most accounts the best cordless out there but make no mistake you will get no where near the warning or range of the best corded detectors, its just not very sensitive. I haven't owned any other detectors recently besides the V1 and 9500 so cant speak for the more moderately priced ones. I have had some close calls due to the lack of sensitivity of this unit and am close to retiring this unit because of it.

update: I bought the redline about a year ago and its the best unit of any I have ever owned. If you live in an area without a lot of false alarms (9500i for those areas) its the best.

Want Escort Solo S2 Cordless Radar and Laser Detector Discount?

This is a great detector as long as it's working, however, the tiny suction cups that come equiped are not adequate to hold the detector and after it falls (which it will) a couple of times it stops working. This one lasted me six months. Why not equip with a suction cup similar to a GPS device?

The Escort Solo S2 is an excellent radar/laser detector. Two AA batteries provide the power for those who don't wish to deal with cords. Also has the ability to be hard-wired to vehicle 12V power with extra accessory cord kit.

Gives ample warning for radar bands Ka, K and X. Note: X-band radar guns are 1970's-type technology and you will encounter mostly K and the newer Ka band radar gun usage. The Solo S2 will pick up a Ka-using speed enforcer up to a couple miles away the cheaper detectors give far less warning.

As for laser speed detection, well, it lets you know when you are being targeted. You will not have enough time to slow down unless you are using this in combination will other anti-laser measures such as special license plate covers and diffraction coating on your headlights. This happens because the infra-red laser beam enforcers use only spreads to 18 inches diameter at 500 feet and 36 inches diameter at 1000 feet.

As for the warranty, although I have had no problems, be aware that the manufacturer, Escort Radar, has a whole list of sellers from which purchases of their detectors will NOT BE COVERED BY THE MANUFACTURER WARRANTY. see http://www.escortradar.com/unauthorized-list.htm

Thursday, June 26, 2014

Husky Liners Custom Fit Second Seat Floor Liner for Select Jeep Liberty KJ Models (Black)

Husky Liners Custom Fit Second Seat Floor Liner for Select Jeep Liberty KJ ModelsThese liners are fantastic. The fit is perfect for my '06 liberty. I live in the North East so our winters can get pretty hairy but these stand up to the mud, snow, rain, and dirt with ease. I would definitely recommend these mats to anyone looking for a durable mat to protect their floors.

This floor liner is a perfect fit on my 2003 Jeep Liberty Sport/Freedom. It's pricey compared to cheap, generic liners but this is a must have for any car owner. It is especially advisable for using during the winter season and rainy season because it catches all the dirt and wetness so that your floor carpets are kept clean and dry all the time. It is certainly worth the investment and I highly recommend it.

Fyi, I first went online to huskyliners.com and emailed the manufacturer to make sure this is a perfect fit for my car. They are very courteous and helpful, and they emailed me back within 24 hours. I suggest you do the same before making a purchase. Also, when installing these on your car, the liners actually have marks on them that tell you which one goes to the passenger side or the driver's side of the car. These are supposed to make a PERFECT fit on your vehicle so if you find that it doesn't do that then you either purchased the wrong kind or you installed it incorrectly. You need not worry though (if you purchased the wrong kind) because Amazon.com has an excellent, customer-friendly returns policy.

Buy Husky Liners Custom Fit Second Seat Floor Liner for Select Jeep Liberty KJ Models (Black) Now

I bought the front and rear floor liners for my 2002 Jeep Liberty. First of all, the pattern is not diamond like in the picture, it's rectangles with rounded corners. The actual liner is not as thick or as "rubber like" as I would like. It's more like thin plastic. Maybe it's just my liners, but they don't fit on the floor perfectly. Overall, they do what they're supposed to, and I guess that's what counts.

Read Best Reviews of Husky Liners Custom Fit Second Seat Floor Liner for Select Jeep Liberty KJ Models (Black) Here

These floor liners fit perfect. They protect the whole floor. I couldn't ask for a better product.

Want Husky Liners Custom Fit Second Seat Floor Liner for Select Jeep Liberty KJ Models (Black) Discount?

Saturday, May 24, 2014

The Essential Gomadic Car and Wall Accessory Kit for the Archos 5 5g (all GB Sizes) - 12v DC Car an

The Essential Gomadic Car and Wall Accessory Kit for the Archos 5 5g - 12v DC Car and AC Wall Charger Solutions with TipExchange
  • Gomadic TipExchange Technology protects your investment by allowing you to change/upgrade either charger by simply swapping the physical charging tip. (Charging tips for Archos 5 5g (all GB Sizes) included with additional tips sold separately).
  • Gomadic Wall Charger is built to support worldwide voltage input levels ranging from 100-240vAC /50-60 Hz. High output 10W /2A transformer provides output voltage and resistor configuration specific to the Archos 5 5g (all GB Sizes).
  • This Gomadic Car charger has a wide input voltage range of 12-24vDC to support all vehicle charging ports. Works in cars, trucks, planes, boat, RVs and more (both domestic and international). Available output current is an impressive 10W/2A . (Twice most competing products!)
  • The Gomadic "Power Sleep" feature limits power consumption when chargers are not in use. Both car and wall chargers will draw less than 0.1W of power when in "ready state" (e.g. not connected to the Archos 5 5g (all GB Sizes)).
  • Both Gomadic car and wall chargers employ state of the art, advanced internal circuitry to protect Archos 5 5g (all GB Sizes) from power surges, overcharging and short-circuiting.

I bought these chargers hoping that the house unit would charge the Archos fast, about 3-4 hours like the claims of the DVR station, both the house charger and the car charger charge at about the same rate as the USB charger that comes with the Archos, on the PLUS side they are more convenient. I'm able to carry them everywhere and charge in the car or at a coffee shop, both units would benefit if their cords where 5' long instead appro. 3'

Buy The Essential Gomadic Car and Wall Accessory Kit for the Archos 5 5g (all GB Sizes) - 12v DC Car an Now

VERY SIMPLE, DO NOT BUY ARCHOS PRODUCTS. PURCHASED AN ARCHOS 5 AND ALL ACCESSORIES. THEY DO NOT PERFORM AS ADVERTISED AND THEIR SERVICE SUCKS. RETURNED FOR WARRANTY SERVICE, 60 DAYS LATER GOT IT BACK WITH NO IMPROVEMENT. BATTERY STOPPED WORKING AT 12 MONTHS AND 4 DAYS AND THEY WANTED TO CHARGE ME IN EXCESS OF $120 FOR REPLACEMENT BATTERY. THEIR REPRESENTATIVES ARE COLD AND UNHELPFUL. THEY DO NOT CARE ABOUT YOU THE CUSTOMER.

IF THIS REVIEW STOPS ONE PERSON FROM BUYING ARCHOS THEN I SUCCEEDED. I PERSONALLY HOPE THE GO BROKE.

Monday, May 19, 2014

JVC Car RMRK50 Remote Control for Head Units

JVC Car RMRK50 Remote Control for Head UnitsI lost this tiny little remote to my aftermarket deck and was amazed to have found it here on Amazon. I wasn't sure it was going to work because you never know and when it arrived I tested it out and it works like a charm. I wish I would have bought two now just so I have a backup incase I lose it again! These tiny things are hard to keep up with!

This is an excellent product that came brand new in the box and I couldn't ask for more. It works with any JVC head unit which is what i was looking for.

Buy JVC Car RMRK50 Remote Control for Head Units Now

It does what it needs to do and battery is inside. Works perfect and is very durable. There is awesome packaging!!

Read Best Reviews of JVC Car RMRK50 Remote Control for Head Units Here

My husband lost his remote for his JVC car stereo. I order this, put the batteries in, and it worked right then and there. I'm ordering another one, for when he loses this one!

Want JVC Car RMRK50 Remote Control for Head Units Discount?

I like it so much. It's exactly like the original one that I have lost and it's working really well.

Save 19% Off

Saturday, May 10, 2014

Fonus Universal Rotatable Car Mount Lighter Socket Holder Dock with USB Charging Port for Apple Iph

Fonus Universal Rotatable Car Mount Lighter Socket Holder Dock with USB Charging Port for Apple Iphone 5Good concept. Poor execution. Gravity. 'Nough said. Could be better in a non-vertical socket, but it shifts downward when plugged into dash socket in our SUV.

I needed some thing easy to get my iPhone 5 in and out of quickly and hold it securely that would allow me to look at it while I drive if needed (gps directions etc.) This is perfect. It fits in my cigarette lighter and holds in place (mine is a vertical plug in holding it straight up as it is beside the shifter). I have purchased the Micro USB adapter to Apple Lightning connector and I can charge it through the USB port with the included cable. I am able to adjust the display to hold in place either portrait or landscape mode. I recommend this product.

Buy Fonus Universal Rotatable Car Mount Lighter Socket Holder Dock with USB Charging Port for Apple Iph Now

nice idea but a bit heavy wants to fall out of the socet every 8 miles or so, the cord that came with it does not work with my phone so I will need to buy a different cord for the iphone 5

Read Best Reviews of Fonus Universal Rotatable Car Mount Lighter Socket Holder Dock with USB Charging Port for Apple Iph Here

Idea is good but construction is flimsy, does not fit properly to the car cigarette lighter.

Its too long when put, after sometime it will knock out of the position. Not worth the money

Want Fonus Universal Rotatable Car Mount Lighter Socket Holder Dock with USB Charging Port for Apple Iph Discount?

The product is solid and works well with any USB cable that you provide.

The only issue is the lighter adapter. Most are very shallow and since this is a heavy with a cell phone, it's easy for this adapter to for the charger not to stay connected.

Save 38% Off

Thursday, April 17, 2014

Dc Car Power Adapter for Haier Portable Dvd Player Pdvd7 Pdvd770 Pdvd771 Pdvd790 Craig Ctft701 Cdv5

Dc Car Power Adapter for Haier Portable Dvd Player Pdvd7 Pdvd770 Pdvd771 Pdvd790 Craig Ctft701 Cdv513 Ctft700 Trutech Lmd-5702rt
  • compact
  • 100% compatible

I am pretty happy with this purchase, it looks pretty stylish having your iPod suspended in the air like that from your cigarette lighter. Only problem was I'm not sure about the remote control, seems a little flimsy and I can't get it to work, no bother though.

Friday, April 11, 2014

Boss Audio BV6000 In-Dash DVD/CD/MP3 & AM/FM Receiver

Boss Audio BV6000 In-Dash DVD/CD/MP3 & AM/FM Receiver
  • ISO DIN mounting & Full detachable front panel
  • Oversized, AniGraFxdisplay
  • DVD, MP3, CD-R and VCD compatible & NTSC/PAL compatible
  • ESP (anti-skip mechanism) & Dual (front and rear) RCA outputs
  • Output power: 80W x 4 channels

Well for the price i think was fair but the facia seems like very cheap material any how i like it!!!

Buy Boss Audio BV6000 In-Dash DVD/CD/MP3 & AM/FM Receiver Now

I used this unit as the core of a home-made entertainment system on a narrowboat where space is at a premium. It was easy to install and functions as advertised. It feeds a pair of mini Gale speakers and the audio quality is excellent. The unit plays CDs DVDs (all regions) fine. The video quality is OK but not spectacular component outputs or at lease a S-Video out would have improved things. A disappointment is the quality of the aux audio input it sounds very thin (lacks bass) when fed from an MP3 player or cassette recorder. Overall, though, I am very satisfied with this device and would recommend the Boss brand for quality and value.

Read Best Reviews of Boss Audio BV6000 In-Dash DVD/CD/MP3 & AM/FM Receiver Here

The radio is great I love the quality of the boss sound.

The only problem is no master volume to trun up the subwoofers

Want Boss Audio BV6000 In-Dash DVD/CD/MP3 & AM/FM Receiver Discount?

This stereo is very beautiful and it sounds perfect for the price

the audio functions are very good

Boss is a good brand, I have had many amplifiers of this brand and they have never failed

This was easy to install and has very good sound quality for the price Cool features too!

Sunday, March 30, 2014

Panasonic LC-R127R2P Black Large 12V 7.2Ah VRLA Battery with F1 Terminal

Panasonic LC-R127R2P Black Large 12V 7.2Ah VRLA Battery with F1 TerminalThank you Amazon (can't imagine modern life without you), Portable Power Systems (who quickly fulfilled this order) and FedEx (who delivered this "standard shipping" item in a very timely manner) for enabling my son's High School Band to use their Lectrosonics Long Ranger 4 ("LR4") portable Public Address unit ahead of a big marching band competition today! The Panasonic LC-R127R2P valve-regulated battery is the only one that works reliably with with the fast charge circuitry of the LR4 unit. The Lectrosonics factory part number for this specific battery is "LRIIIBATT", but even mighty Google can find few traces of that identifier! Websites specializing in marching bands, auctioneers, etc., stock the LR4 and its official replacement battery, but, typically, at double the price (not too friendly for cash strapped High School Bands) of this battery on Amazon. So, if you wish to replace the "LRIIIBATT" in your LR4, un-solder the brass terminal extenders from the old "LRIIIBATT" battery and solder them onto the terminals of a new LC-R127R2P battery -see picture in amazon's shared images folder for this item. Your LR4 will then be good-to-go and you will have saved your school band $30+ dollars for just 10 minutes of effort with a (50 to 100 watt) soldering iron.

Decent quality replacement part, will buy again when needed. Price was pretty good on amazo, about $25 cheaper than any other place I could find.

Buy Panasonic LC-R127R2P Black Large 12V 7.2Ah VRLA Battery with F1 Terminal Now

Fiber optics has a small price. My system has this battery and a battery back up system. The Panasonic battery was not covered by ATT but it was easy to get too and an Amazon vender had just what I needed (works as advertised).

Read Best Reviews of Panasonic LC-R127R2P Black Large 12V 7.2Ah VRLA Battery with F1 Terminal Here

This item was an exact replacement for original equipment. It was - to a T. Delivered by express mail, in perfect condition, and exactly as described. I couldn't be more satisfied. LRV

Want Panasonic LC-R127R2P Black Large 12V 7.2Ah VRLA Battery with F1 Terminal Discount?

Received the battery quickly and in good condition. Using it for a portable speaker system from Cambridge Soundworks. Much better battery than the previous one I purchased from Radio Shack. The only negative is that the shipper doesn't send you an order confirmation. Which was a little scary. So be patient. My item showed up in about a week.

Saturday, February 15, 2014

CES 10 Gauge 2 Pin Quick Disconnect Harness

CES 10 Gauge 2 Pin Quick Disconnect Harness
  • 10 Gauge Wire For Heavy Current Applications
  • Polorized Molded Connector (Red and Black Wire)

First off these connectors appear to be pretty good quality. The connectors easily connect and disconnect and are snug enough that I do not fear them coming apart on their own.

Each harness is actually two plugs connected together with a red and black wire. So while you get about twelve inches of wire with the harness you'll really only get about six inches connected to each plug. Right now though that's my only complaint, which isn't much of one as for my application I am easily able to splice each plug onto a longer cable.

Buy CES 10 Gauge 2 Pin Quick Disconnect Harness Now

I bought a bunch of these six months ago at least, to use in my pet project solar system, that I am always working on and expanding. I really liked the convenience of the disconnect feature and wanted only number ten gauge wire. And this had the right gauge. I also found several in-line ATC 10 gauge wire fuse holders that work really well. However they started heating up on me and I didn't notice it right away!

I noticed in the reviews that some people were having trouble finding the fuse holders in 10 gauge. Try "The Install Bay" ATFH10C-10; WTRPRF ATC FSEHLD 10 GA W/C 10. These are the ten pack, but they are available individually as well. Alternately Ancor

Marine Grade Products Fuse Holders Amps 30 Style ATO/ATC INLINE; Part #607023

Anyway, I have been using these quick disconnects as leads into and out of my Sunsaver Mppt 15Amp Solar Controller. And I also wired them to two different battery banks, plus my solar panels lead in wires, basically on every piece of equipment in my system, though not to any of the fuse 10 gauge inline wires obviously.

I started having some strange problems where the Morningstar Sunsaver MPPT was skipping over the bulk charge phase and going into absorption almost right away. Battery voltage would be only 13.05 volts but the Sunsaver battery terminals were reading at 13.85V.

I was running about 150 watts in from the panels and that was very low. They added up to 220 watts nominal. And the 150 number was only at peak radiance levels.

I was using a Dr Watt meter that I connected using these quick disconnects into my battery out cables to try and find the problem.

I checked everything, cleaned the three deep cycle batteries that I had wired in parallel. Checked each solar module for voltage power at the box and at each end. Everything seemed good.

Finally I also upped the thickness of my battery interconnect cables to 4 gauge.

Still had the Sunsaver misreading the battery voltages. I figured it had to be a possible ground fault somehow feeding back to the Sunsaver and spoofing it into thinking the voltage was much higher then it really was.

If this is lengthy it's because I want to explain the processes i went through before i make the complaints. I had crimped connectors But didn't solder as I don't really know how to do that well.

Finally just touching the plastic housing of the quick disconnect on my battery lead out which connected to my battery cables I discovered that the plastic housing was burning hot. At only 120 watts solar input, 13.10 volt input. Output I mean.

Trying the quick disconnect on a brand new Samlex Power 15AMP Charger I got the same heat overload. Looking into the plastic housings of all of my disconnects you can see that the male pole is made from simply thin hollow tin. and so is the female side as well. The wires are 10gauge but the actual connectors look like 16 gauge at best! Real cheap stuff that they are using.

So I tried a bunch of different ways to connect them up and no matter how I did it, they still are getting so hot especially at the 130-200watt 12volt level, that it looks like the one I was using as the connect to my battery out terminals on the Sunsaver may have melted a bit and some bleed through occurred feeding back to the Controller. I yanked all of the connectors out of the system and presto! The Morningstar Sunsaver MPPT started working perfectly, and all problems went away! Really lucky that Morningstar builds such a wonderfully sturdy device that it wasn't harmed by the current feedback loop.

Now I don't have any disconnects at all and I really miss them. If anyone has any suggestions please send me a comment. I am thinking of switching over to the PowerPole system, but really am starting to hate all of these additional costs and over spending!

Oh, lastly, I never had any problems matching up positive with positive and negative with negative. It's really simple to remember that each loop needs each side wired as they are when you first get them.

Read Best Reviews of CES 10 Gauge 2 Pin Quick Disconnect Harness Here

I bought this to be able to connect and quick disconnect a solar panel I'm using for a portable solar power setup. Adding the proper connectors to splice wires together was all it took to add this connector in and it works great. It works great for my needs!

Want CES 10 Gauge 2 Pin Quick Disconnect Harness Discount?

This 10awg 2 pin connector can handle the load for e-bike battery to motor connections very nicely. Of course it has other uses in the car stereo market, but I decided to make all my electric motor to battery connections using this high current capacity connector and they work great. Good for 30-35 amps which is about as much as the average ebike hubmotor can put out. I will be buying more of these great value connectors in the near future for my next ebike project.

Lately I have sent a few negative reviews (below 3) and have noticed that Amazon will summarily dump them. I can only guess that suppliers have infiltrated convinced them that this is not good for business. For folks that have noticed this peculiarity you might pass it on.

Thursday, January 23, 2014

Shuriken SK-BT35 35ah Battery

Shuriken SK-BT35 35ah BatteryThe battery came shipped with around 12.2 volts. Hooked it up to my car and now the electrical system runs smoothly. No more dimming at nights. I only have a 500w rms system and I just turn it up 1/2 way most of the time.

After 3 weeks the battery managed to charge up to 12.67 volts (taken to account surface charge).

Thursday, August 15, 2013

Temperature Correcting Battery Hydrometer

Temperature Correcting Battery HydrometerI bought this hydrometer to replace one I dropped and broke. I have two others but with the amount of batteries I maintain, one can never have too many hydrometers laying around.

I have used hydrometers for years maintaining deep cycle batteries and have learned the ones with the pointer are a joke. You can test the same cell three different times and get three different readings. If they show anything other that 1.260 (100% charged) they are inaccurate. I simply cannot trust my batteries to a inaccurate tester.

You really MUST use a hydrometer with a floating cylinder like this one. Pointers, floating balls, disks, etc. are just not accurate enough to bet your expensive batteries on!

Now on to this little jewel:

You will not find a hydrometer that is this accurate, in this price range anywhere. I compared the readings from this tool with readings from my much, much more expensive Freas hydrometer and the readings were so close you could not read a difference without a magnifying glass.

The other big feature is this too has a built in thermometer. You MUST know the electrolyte temperature in order to get a valid reading! Instead of simply showing the degrees, this meter has a scale on it telling you how many "points" to add or subtract to your reading. Much more user friendly than using a separate thermometer to read temp.

The thermometer on this unit is dead on.

I am not one who usually writes reviews, but for this tool I had to. It is a great accurate meter for a great price. Not sure where you could go wrong unless you dropped it. In that case order a spare. They are cheap enough!

I will be ordering a couple more to have around and a few to give as gifts.

Bought a plastic battery tester at the local auto parts store and it sucked. I took three readings, back to back, of the same cell and got three different results. Their is a reason glass hydrometers are the standard for commercial battery testing, they work. In Aviation its all we use, and in a pinch I though I could get away with the plastic CHEAPO. This works awesome. Gives great, repeatable, readings of the state of charge of the battery. Price was great, shipping was FAST! I would buy this again in a heartbeat!

Buy Temperature Correcting Battery Hydrometer Now

Difficult to use, thermometer does not appear at all accurate. Also purchased the standard model hydrometer. It worked much better.

Read Best Reviews of Temperature Correcting Battery Hydrometer Here

The manufacturer should have placed a pull string under the bulb. Trying to get the foam-lined bulb out can cause it to break.

Want Temperature Correcting Battery Hydrometer Discount?

A glass hydrometer in a glass tube. 'Nuff said. I use this hydrometer to maintain the battery bank in my motorhome, as well as the batteries in the rest of my vehicles. The hydrometer has already identified a bad cell in a vehicle that was cranking over slowly. This saved me from a lot of frustration, and a possible total battery failure while traveling.

Save 43% Off

Sunday, August 11, 2013

Car Camcorder DVR Car DVR Full HD 1080p Car Video Camera DVR Car Car Black Box 5.0 Mega with Dual L

Car Camcorder DVR Car DVR Full HD 1080p Car Video Camera DVR Car Car Black Box 5.0 Mega with Dual Lens/ Dual Cam+GPS Function and Gravity Sensor
  • Built-in Li Battery supports to take videos while charging
  • built-in gravity sensor
  • Supports :4GB -64GB Micro SD card, but it doesn't support 2GB or 1GB Micro SD card (not included the TF Card)
  • Supports to take videos automatically once the engine starts
  • Supports to delay the startup in case the transient pulse current when the engine

I like it in one way coz for dual cam, but the angle is not wide enough the way I want it, but still is good, Like to recommend this to my other friends.

Sunday, July 21, 2013

Kat's 24050 50 Watt 2"x 5" Universal Hot Pad Heater

Kat's 24050 50 Watt 2'x 5' Universal Hot Pad HeaterI purchased a used sailboat with a small diesel engine (Yanmar 1GM10) that was always hard to start. After cranking for the better part of a minute, the engine would fire ... and backfire from all of that fuel that the mechanical injection system put into it. Boat "experts" recommended expensive repairs, such as injector replacement, and I finally stopped at my local Kabota tractor shop. A knowledgeable person recommended an oil-pan heater, so I bought this product (they were out of stock on that seasonal item, but Amazon had it to me in 2 days).

Anyway, the engine holds 1.5 qt of oil, which is appropriate for a 50 60 W unit. This 2 x 5-in pad fit my oil pan perfectly. Installation took about 10 min to sand off the paint, wipe it down with alcohol, and stick on the self-adhesive pad. I went to the boat the next day, and it turned right over ... and it has ever since.

For less than $20.00, I have an engine that starts well every time. The other benefit is that it keeps the oil above about 110 deg F, so the wear on the cold engine will be greatly reduced, with longer life expected. For that reason alone, this heater would be worth the cost. BTW, my monthly electric charge at the marina is $0.05/kW-hr, so it costs less than $2.00/mo to run it continuously. If you are even considering such a small investment, stop worrying and get it. You won't be sorry.

Ever since Dishnetwork "upgraded" me to the new eastern arc dish I was having signal loss problems whenever it snowed. In order to pick up three satellite feeds with one dish they had to make this dish much larger and it also points at a higher angle to the sky. Unfortunately that also makes it a one big snow collector. After a lot of research I decided to give these little babies a try. I installed two of these heaters with the self-adhesive backing and then sealed the edges with hi-temp RTV. After wiring in a switched outdoor electrical outlet, all I have to do now is flip a switch in my house to melt the snow off of my dish. In a matter of 5 minutes my signal is right back up in the normal range on all three satellite feeds. You can go ahead and spend $100 or more on those fancy dish heaters if you want to. Or, be like me and save yourself a ton of money by just getting two of these. I've read other reviews where people say they don't stick well. I haven't had that problem. I lightly sanded the installation areas on the back of the dish with very fine sandpaper and made sure it was clean and dry. They have been on my dish for a year now and show no signs of degradation.

Buy Kat's 24050 50 Watt 2"x 5" Universal Hot Pad Heater Now

Used 50 watt heating pads on my sat dish to keep snow from building up. Works great! Used 2 because dish is long and narrow. Placed one on each side. Only use them when snow builds up and blocks signal. Clears dish quickly and reagains signal. An absolute necessity when looking at satelites directly overhead when dish can fill with snow.

Read Best Reviews of Kat's 24050 50 Watt 2"x 5" Universal Hot Pad Heater Here

I use this pad heater attached to the engine block of a small diesel generator. Even in 10-20 degree weather it heats the engine to 50 degrees which allows it to start effortlessly. The quality is excellent and I'm VERY glad that its made in USA.

Want Kat's 24050 50 Watt 2"x 5" Universal Hot Pad Heater Discount?

I came across good reviews from others that like myself, were looking for a satellite dish snow removal system that would keep the dish clear of snow and also cost a lot less than the $132.00 system advertised as the one that would fit my DirecTV HD-dish.

An EXCELLENT purchase!!!! For a total of about $60 I now have a system that stops the chore of going out to brush off the dish of snow! Very happy so far. I bought the two of these hot pads and locally found a temperature sensitive plug. As I only need this set up in the winter I have the two cords plugged into a multi-plug 3 way plug and these are in turn stored in a weather PROOF plastic outside electrical box that no moisture has penetrated ( a LOT of rain and some snow so far) and then to an outdoor winter rated extension cord to the very nearby storage building with the power in it and then to the temp controlled power plug that's on at about 30 and off at 40.

As we usually get several feet of snow in this area but haven't yet, I was concerned that even with the temp plug it might be getting the metal dish itself too hot on the places I put these peel and stick heat pads on. I checked with a infrared temperature thermometer and was releaved to find that the combined 100 watts of power on these units was translating to a temp of 45 on the dish with an ambient temp of 30. So very happy all the way around! Also a nice spread on the wide dish as I thought I might have to get a third heat pad to make it all work right but it does as is.

At least my dish is set low enough that I can reach it with a long broom, if we had the dish on the house, this would be the ONLY way to go in the winter!!! Highly recommended for these little guys!!

UPDATE 12/21/2012

We've had quite a bit of snow, almost 2 feet in the last week with days of almost continuous light to moderate snowfall and the dish has consistently stayed clear of snow buildup on the dish. There has been some buildup on the arm the actual receiver sits on, but no disruption of the signal to the TV and no more manually cleaning the snow off the dish, VERY happy about that! And only 100 watts total draw works too.

Save 44% Off