Showing posts with label where can i get a car battery cheap. Show all posts
Showing posts with label where can i get a car battery cheap. Show all posts

Wednesday, October 22, 2014

Midtronics PBT300 Battery Charging Starting System Tester

Midtronics  PBT300  Battery Charging Starting System TesterPlease be aware that there is a kit version and a non kit version of this item. The Midtronics Web site () displays the kit version with terminal adapters needed for side terminal batteries and a storage pouch. You will not get the side terminal adapters or the storage pouch with this item from Amazon.com, or at least I didn't. I found out this information by emails from Midtronics. The shown accessories lead partly to my decision to purchase the more expensive PBT300 model. The impression that I got from Midtronics email communications is that they didn't seem to care whether or not I got the accessories. They stopped communicating. It's sort of a "They gotcha" thing.

The unit seems to work O.K.

I don't normally write reviews, but I was a bit ticked about the accessories shown under the PBT-300 specifications tab on the Midtronics web site that were not supplied. Item only rated 4 stars because of the deception. The Midtronics web site offers no distinction between "kit" and "non kit" versions as of 11/30/2009.

I bought this battery diagnostic tool so I could troubleshoot electrical systems. It cut my time in half. It is real easy and user friendly to use. I am a mechanic and I have used it over sixty times since I bought this. Great product!

Buy Midtronics PBT300 Battery Charging Starting System Tester Now

Battery tester works as stated. CCA settings, however, do no line up with all battery ratings. Settings are in increments of 20 and does not line up with my battery rating.. My battery is 750 and I had a choice of 740 or 760. Go figure??

Read Best Reviews of Midtronics PBT300 Battery Charging Starting System Tester Here

I brought this charger because I work on vehicles and knew it would come in handy. I had the $60 cheaper version and I think that it does everything that this $215 model does except tell you the top voltage for the alternator and the low voltage for the starter. If I had to do it all over again I would have brought the cheaper model. I gave this four stars because it does what it says it would do...pruittjr1

Want Midtronics PBT300 Battery Charging Starting System Tester Discount?

We use this in our repair shop. Great for the price. Saved from buying local or tool truck. Does everything as advertised.

Save 27% Off

Tuesday, October 14, 2014

Wagan IN9438 12V Heated Seat Cushion with Lumbar Support (Black Velour)

Wagan IN9438 12V Heated Seat Cushion with Lumbar SupportBefore purchasing I read the reviews here, noting several complaining about the frailty of the 12 volt power plug. I purchased this model in November 2011. I also purchased this model: Wagan IN9738-5 12-Volt Heated Seat Cushion for a few dollars less. Each item is installed in a different car and gets routine use here in the chilly state of Michigan. So far, we've experienced no issues with the power plugs on either of the cushions. This model ('velour' material) does feel a bit nicer to the hand, but that's the only difference other than the shape and size of the cushions.

The switch for Off-Low-High is the same for each model and works fine and seems durable. I suppose if it were to get jammed somewhere near the seat rail of the car seat, it could be damaged when sliding the seat back and forth, but that hasn't happened to us. If your car has the type of 12 volt power outlet that automatically goes off when the car is shut off, you don't have to worry about the cushion accidentally draining your battery. One of my cars is like this. In the other car, we must remember to either shut off the seat, or unplug it. Not really a big deal, and the plug seems durable enough to stand up to repeated unplug/plug-in use.

The low setting is all we've used so far, and that's been warm enough. Maybe in January and February we'll need the High setting. With these cushions, we've found we don't need to have the heater blowing on High or even Medium. On long trips, we can take off our heavy coats and be a bit more comfortable.

As for the lumbar support in this model...with the bulky clothing we wear in the cold months, I can't say I notice it. Alternatively, maybe I don't notice it because of the differences between the seats in the two cars.

Neither of our cars came with heated seats and these products are the next best thing to the factory option. I believe they are worth their current prices even if they only last one winter, but I don't foresee that being the case.

Bought it for my wife and she loves it. But there are a couple issues. First and most important is that it does not have an automatic shut off. Twice we went out the next morning and had a dead battery. The other is that our Suburban has a seat mounted seat belt and an arm rest so the back straps don't hold the cushion in place. We have solved this by using upholstery "twist pins"

Buy Wagan IN9438 12V Heated Seat Cushion with Lumbar Support (Black Velour) Now

These work wonderfully. I bought two for my 3000 mile drive across the country and they keep you warm without ever feeling like you are on fire. And the very best part for absent minded folks like myself is that they automatically turn off when you turn the car off so you can't drain your battery!

Read Best Reviews of Wagan IN9438 12V Heated Seat Cushion with Lumbar Support (Black Velour) Here

I bought 4 of these for family Christmas gifts after we purchased a new car with heated seats. These work the same way and each family member has been VERY pleased with the performance. My next purchase will be 2 more for the back seat in my car. Unless you have cold feet, a heated seat can be more comfortable than having the car heating system on. And for long trips the extra lumbar support with heat is a "back-saver."

Want Wagan IN9438 12V Heated Seat Cushion with Lumbar Support (Black Velour) Discount?

This is a nice seat cushion. It is more comfortable (and fits the contours of a modern bucket seat better) than the other (Wagan IN9738-5) seat cover we have in our cars.

The lumbar support is decent but minimal. It's a soft lumbar pad slightly thicker than the padding on the rest of the cushion. It won't really help much if your seat lacks lumbar support, but it won't hurt, and is nice to have. My car has sufficient lumbar support, and the addition of this pad doesn't make it too much--just an extra, nice cushy feel in the small of my back.

As other reviews have mentioned, the bottom straps are...difficult. There will most likely be no appropriate items for you to fasten the 4 little straps (with clips on the end) to. The little elastic straps are just not long enough. An easy solution is to tie strands of cord or twine to appropriate fixation points on the bottom of your seat, and then tie or clip the pad's little straps to your cords, adjusting cord lengths as necessary. One of the cheap plastic clips broke in half (it was not abused by me) while I was installing it, but it was not needed, as I just tied the cord to the elastic strap instead. The missing star in my rating is for the cheap clips and the poorly designed straps on the bottom cushion.

By the way, if memory serves me correctly, somebody noted that only the back (or bottom?) provided heat. Their cushion must have been defective. In my unit, heat is evenly distributed throughout the back and bottom cushions.

By the way, don't be stupid like I was and plug this into your cheap multi-port 12v adapter without checking to see if the adapter's fuse is robust enough to handle the load. Fried my cheap little sub-$5 2-port adapter instantly. Just gave me an opportunity to upgrade, I guess.

Save 16% Off

Saturday, September 6, 2014

Scosche Akpa-1Obl 10-Gauge, 250-Watt, Single Amplifier Wiring Kit

Scosche Akpa-1Obl 10-Gauge, 250-Watt, Single Amplifier Wiring Kit
  • Everything you need for single amp install
  • Power and ground cable with fuse
  • Single pair of RCA cables plus Turn-On Wire
  • All 100% Oxygen Free Copper Wire

Does exactly what it's supposed to. Get music and power to your system. Can't say much more about it. I would buy it again if I was doing another stereo installation.

Buy Scosche Akpa-1Obl 10-Gauge, 250-Watt, Single Amplifier Wiring Kit Now

Pure oxygen free copper, ample amount of cable, interconnets are quite unrobust but all in all a very nice kit for a lite duty hook up and at 13 bucks including delivery, what can you say?

Thursday, August 28, 2014

AUTOPAGE RS730LCD REMOTE START 2-WAY SECURITY SYSTEM

AUTOPAGE RS730LCD REMOTE START 2-WAY SECURITY SYSTEM
  • 2-way, 4-Channel Vehicle Security System / Car Alarm and Remote Car Starter
  • On-board 2 way Serial Port for i-Data Link Data Bus and Bypass module integration
  • C3 compatible data port for C3 Telematics integration
  • 5-button configuration with selectable "Button Lock" to prevent accidental mis-use

nice system everything work perfect start the car up evertytime without any problem nice design remote control chrome finish i love it.

the signal is very strong i can start my car up in one block away real nice. worth every penny if you looking for some cheap and perfect remote starter this is one for you......

Buy AUTOPAGE RS730LCD REMOTE START 2-WAY SECURITY SYSTEM Now

This is a very good alarm for the price. I recommend to anyone looking for a reliable affordable pager alarm.Excellent range,beautiful remote.Quality for the price. Great deal, grab it and run.

Read Best Reviews of AUTOPAGE RS730LCD REMOTE START 2-WAY SECURITY SYSTEM Here

i am an installer for over 13 years and never have i came across somebody that does not warranty their NEW products. i purchased this and installed it on one of my customers vehicles and it did not work. i just asked to have it exchanged for a new one or refunded my money but was denied because they stated it was over my 15 warranty peroid. i didnt know i was suppose to buy and install right away to figure it out if it worked. i assumed it worked cause i purchased it new and now im stuck with a defective device. seller was no help at all sold by sigmaenterprises.

Want AUTOPAGE RS730LCD REMOTE START 2-WAY SECURITY SYSTEM Discount?

This is a great price for this unit. I've had mine installed for about a month or two now and it continues to work flawlessly. I would recommend getting this professionally installed unless you have experience with remote starts and car alarms. It took me a little over 6 hours to install and set up. It has a lot of menu options and they are pretty easy to set unlike some other systems I've installed. Overall this is a good system for the price and I would recommend it to anybody looking for 2-way starter / alarm.

Thursday, July 17, 2014

PYLE PLMCA30 Motorcycle Mount Amplified 200 Watt x 2 Stereo Sound System with Dual Handlebar Mount

PYLE PLMCA30 Motorcycle Mount Amplified 200 Watt x 2 Stereo Sound System with Dual Handlebar Mount Speakers
  • 200 Watts X 2 micro amplifier with Wire harness - Speaker Dimensions : 2.5''(W) x 2.5''(H) x 3.75''(L)
  • Dual 2.25'' Bullet style Wheatherproof speakers- Amplifier Dimensions : 3.25''(W) x 1.25''(H) x 2''(L)
  • Universal handlebar mount rotary volume control
  • 12 Volt T-TAP
  • Easy Chorome Stainless Mounting Brackets and Accessories included

I really didn't expect much from this kit as I see systems which cost multiple times the amount with very similar specifications, so what could this kit possible bring to the table at the budget price point it's currently going for? Plus as I'm thinking of selling the bike that I put these on, I really didn't want to spend the earth.

I have to say though I'm very happy with both the kit's contents, the look and build of the speakers and the actual audio that pours out of them. I have made a quick video which will better demonstrate the set up so feel free to take a look at it now. Please note that the stereo effect and loudness is lost on this compressed video but let me assure you these are very loud and sound great with no distortion until you turn it up to 100% and then it's minimal as you will hear in the video. At highway speeds of 70+ you can still hear them although you have to have them turned up quite high. When you come to a stop you realize just how loud they are though obnoxiously loud at full whack!

So I used a fuse tap (if you search for fuse tap on amazon you'll find lots of them for pennies) to hook the amp directly to the wiring harness of the bike and I ground it to the frame both spade and ground connector were supplied. It is is important that you don't just hook the kit up to the battery as you don't want the amp bleeding it dry during downtime, and an amp at 200 Watts wouldn't take long to drain it at all. So either add an inline switch (not supplied but easy to add) or hook up to your ACC/auxiliary on the bike or do what I did and tap into the ignition fuse directly.

Very happy with the result. If you're in the market for a low price, high quality speaker set up for your bike then this could very well be it.

Buy PYLE PLMCA30 Motorcycle Mount Amplified 200 Watt x 2 Stereo Sound System with Dual Handlebar Mount Now

Not a bad little stereo. I had a better sounding system on my last bike (a shark stereo), but it was UGLY! This system sounds fine, but I did have to set my iPod to an equalizer setting of almost no bass in order to avoid distortion. I have loud aftermarket pipes and a windshield and I can hear it fine at highway speeds.

Since this is the lower-grade model, Pyle kind of jips you on installation hardware. The brackets for mounting the speakers are small "z" shaped brackets, which are useless for handlebar mounting. I went to Lowe's and bought some 1" anodized, rubber-sheathed "p" brackets for a little over a buck and used them to mount the speakers to the handlebars. I need to go buy another set to mount the volume control to the handlebars.

I think the next stereo up (the -60 model) gets you the chrome "p" brackets plus a higher watt amp and am/fm too. I never use the am/fm and found the "p" brackets for cheap, so the only reason for me to buy the upgrade would be for the larger amp.

Read Best Reviews of PYLE PLMCA30 Motorcycle Mount Amplified 200 Watt x 2 Stereo Sound System with Dual Handlebar Mount Here

PYLE PLMCA30 Motorcycle Mount Amplified 200 Watt x 2 Stereo Sound System with Dual Handlebar Mount Speakers

What a great product for the price! I put this on my 07 Heritage Softail. I was very suprised at how loud it was.

Want PYLE PLMCA30 Motorcycle Mount Amplified 200 Watt x 2 Stereo Sound System with Dual Handlebar Mount Discount?

Reasonable for city driving. Over 35-40mph can't hear much. Worked fine for 2 months, then mysteriously stopped working. Presumably something fried inside the amp.

Save 67% Off



So here is a video review of the plmca30 which we installed on a buddy's ATVyou can see how to hook it up and judge for yourselves. I think for the money it's awesome!

Monday, June 2, 2014

Husky Liners Classic Style Custom Fit Molded Front Floor Liner for Select Ford Edge/Lincoln MKX Mod

Husky Liners Classic Style Custom Fit Molded Front Floor Liner for Select Ford Edge/Lincoln MKX ModelsI ordered these sight unseen for my new 2011 Ford Edge Limited. I was worried I might not like the fit but they fit better than expected. In fact I love how they fit and look. Great for keeping the snow and dirt off my car floors.

I had the other major floor mat product for my Ford Edge. While their fit and material was great, they were constructed with an opening on the driver's side mat where the rention clip fit in to keep the mats from sliding. The problem is water seeps through this hole into the carpeting. I used duct tape to seal this opening. I had purchased these Husky mats for my Mustang and there are no openings the retention clip opening is secure and water does not seep through. The Husky floor mats are now available for the Ford Edge and I ordered them. Getting and installing them, Husky's fit is great with materials that are guaranteed. These liners will hold much water and, with the way they are constructed, I don't have to worry about melting snow and slush with mud getting to the carpet. Inspect the products closely and you will see the difference and save a few dollars with Husky!! Love these mats!!

Buy Husky Liners Classic Style Custom Fit Molded Front Floor Liner for Select Ford Edge/Lincoln MKX Mod Now

I have the husky liner for the cargo area also. These liners are the best & they are made in the USA. Fits me 2007 Edge perfectly. Going to purchase the same for my 2004 Aztek. If you are looking for quality floor mats these are the best.

Read Best Reviews of Husky Liners Classic Style Custom Fit Molded Front Floor Liner for Select Ford Edge/Lincoln MKX Mod Here

This product is the best to keep your floors clean. If you spill something it remains inside the contained area.

Want Husky Liners Classic Style Custom Fit Molded Front Floor Liner for Select Ford Edge/Lincoln MKX Mod Discount?

High quality, fit perfectly with no gaps or places where they do not lie flat on the carpet. Very nice mats and cheaper than the competition. The nice thing about the Edge is that the front mat sits down in the floor pan so the lip is below the edge of the door frame. The Husky mat fits snuggly between this lip and the center consol so there is no lip standing up on the mat to trip over.

I clean cars and these mats definately protect the carpets as well as any and better than most.

The fact that the hole for the OEM pin that holds the drivers mat in place is completely covered by these mats is a plus. Others have an opening that allows water and dirt to get to the carpet. This is another indication of the quality found in these "Made In America" mats.

Save 41% Off

Saturday, April 12, 2014

Priority Start 12-Volt-Pro-SP PriorityStart Automatic Battery Protector

Priority Start 12-Volt-Pro-SP PriorityStart Automatic Battery ProtectorBMW X5. Installation had to go rear, right near battery, which meant mounting on spare tire wheel well and then buying a new positive cable to stretch from the battery to the Priority Start. Perhaps on cars with battery in front, not such a big deal installing.

Priority Start as disconnect battery only once I know of and that when car sat for an entire week.

Certainly rugged.

Recommend if you can tackle an installation job that might mean drill, cable, etc.

First of all, this electric shut off device worked, but it was poorly designed. On the top of the unit is a metal contact to screw a battery post to. But when I used my fingers to tighten it the post kept turning. I tried to unscrew the battery post but it kept turning and it wouldn't come off.

I ended up using a large screw driver to lift the top metal contact up until I could pry it all the way up. Then I discovered the problem. Below the metal contact plate was a hex nut that wasn't attached to anything. It wasn't welded to the metal plate. It was merely glued down with what looked like epoxy. It is a horrible design and I'm sure everyone who buys this device will eventually fall victim to this serious design flaw, especially if they try to remove it.

I imagine it would have taken another few cents to weld the metal nut to the metal contact plate so the company choose saving a few cents over making the product competently.

I ended up leaving the metal contact pried at a 90° angle so I could tighten the battery post to it. I had to leave it in this position because I couldn't tighten the post without using a wrench to hold the hex nut.

I wrote the company and even sent them photos with ways to properly engineer this device but I never heard from them.

Since I was forced to pry their PriorityStart open I'm sure the company would use this as an excuse to void my warranty, which doesn't last long anyway. And speaking of 'warranties' the buyer has to pay for the return of the unit and THEN the company determines if the unit is bad and from the wording of their warranty information it leads me to believe they will use any reason to avoid honoring their warranty.

Obviously their product is poorly engineered when finger tightening a battery post to it will cause an epoxy-held hex nut to break free. The company obviously doesn't care if customers have to be subjected to what I had to endure. Per their warranty it's obvious they wouldn't replace a unit if the top metal plate had to be pried open just to remove their device from a car even though 100% of the problem was their fault.

Fortunately, their product does work and I can start my car but to have engineered it the way they did reveals a company that doesn't have a quality control department or doesn't care about what happens after a sale is made. After all, their warranty would discourage (intentionally?) almost anyone who tries to get a replacement or a refund.

Lastly, I'm a NASA engineer and no device at NASA would have been made as defective as this device is. I give it 2 stars because it does work but if it was designed properly I would have given it 5 stars. Btw: Any smart and ethical company would take my suggestions and redesign their product and reward a person like myself who told them how to redesign it. It would lead to more sales and more satisfied customers. You'd think a company would have that as their number one priority but sadly most companies don't give a damn about customer satisfaction and only care about making a quick buck. If this company redesigns their product using my suggestions and doesn't compensate me for it then it reveals their total lack of gratitude and appreciation. It also reveals what kind of people are manufacturing & selling this product.

Buy Priority Start 12-Volt-Pro-SP PriorityStart Automatic Battery Protector Now

i purchased this for installation on a 96 suburban. i use this vehicle as a member of the local volunteer fire department and police reserves. My hope was that this would allow me to run my emergency led lights and radio equipment on a scene without the need to leave the engine running. It works perfectly. With the fire radio on and receiving, led strobes front and rear and the headlights and hazard signals on the system shut the power down at 1hr 15min. a quick flip of the head light switch and the truck started up just fine. i was a bit concerned if it would work for this purpose but it has performed perfectly.

installation can be a little tricky if you have short or tight battery cables but there is nothing "hard" about the install. i was installed in testing in less than 15min.

this product is great. i will be adding one to my daily driver as well.

Read Best Reviews of Priority Start 12-Volt-Pro-SP PriorityStart Automatic Battery Protector Here

Update Sept 2012 - The Battery Protector protected my battery

Wife tried to open up car, no power, she opened trunk with key, that put current to the battery protector, that put battery back on line, opened car, car started, worked like a champ.

This car has a tendency to not shut off a relay, somewhere in car, the battery protector worked, money well spent.

------------------------------------------

Installed item on car, so far working as advertised.

Have not had a problem with a battery drain yet, so can not say that item has protected the battery yet.

However I am sure it will, this car likes to surprise me every now and again.

Battery on this car is in trunk, and space is limited, was able to make it fit, in my case the cable being a few inches longer would have helped, but it is OK.

Seems to be quality product.

Want Priority Start 12-Volt-Pro-SP PriorityStart Automatic Battery Protector Discount?

The ProMax works great. I have not had to jump start the car or charge the battery once. It was easy to install.

Wednesday, April 2, 2014

Mr. Gasket Hot Rod Calc Street and Strip Performance Calculator

Mr. Gasket Hot Rod Calc Street and Strip Performance CalculatorGreat drag racing calculator. Figures just about anything for drag racing or engine info from HP to ET and a whole lot more. compression ratio, cubic inches, etc,etc,etc.

I purchased this for my husband for his birthday! He loves it. I can't tell you what he does with it but I see him getting it out and figuring things out without getting frustrated! For me that's priceless!

Buy Mr. Gasket Hot Rod Calc Street and Strip Performance Calculator Now

I was stumped at Christmas time on what to get for the man who has everything race car... until someone told me about this gadget lol I got it for him and he absolutely loved it! It was his new favorite toy and said it worked great! It was cheaper here than on other websites and it made my husband's face light up! Thanks!

Read Best Reviews of Mr. Gasket Hot Rod Calc Street and Strip Performance Calculator Here

Saturday, March 22, 2014

Whistler Pro-800W 800 Watt Power Inverter

Whistler Pro-800W 800 Watt Power InverterA prime selling point is the internal technology it's designed to handle high startup loads for longer than most inverters. Note that a common load nowadays laptops and electronic equipment (which use their own transverters) have a high capacitive load. Power tools usually an inductive load. So you need an inverter that won't trip out while most modern (i.e. non resistive) loads start.

For my wife's van 3 laptops and a Wii is common. For my truck for various power tools. My trusty 400W would no longer reliably handle the load. Esp at startup without a plug which in first dance.

Don't look for cigarette lighter adapter it just won't work for 800W. They're common with 400W inverters but won't reliably supply them either (12-14v x 15 Amps is about 200 watts). And even your cigarette lighter wire is usually undersized (read not for continuous use at fused amperage) So don't ding any high power inverter over cigarette lighter adapters it's a simple technical requirement.

To handle the load, I'm running new fused power wires from the battery through the firewall to the dash.

Note one trick on running wire run two 10 gauge wires instead of one large one for each polarity. Just be sure each red/positive is individually fused at the battery and the you can tie them together at the inverter (each wire is self protected safe and both together supply needed current). This is a common trick used by HAMs and others. Much easier wire to work with and fuses (up to 40A) are standard automotive fuses and holders.

Here's a link to that wiring trick (or search for "most practical powerpole size for 700 watt inverter")

I use this power inverter to power a laptop, webcam, and video camera while storm chasing. The only problem I have is the USB slot. It will not keep up with a smart phone, at least with everything powered up and charging. I fixed that issue by adding a small extension cord.

Really this inverter works pretty good. Keep in mind you're getting what you pay for. If it's cheap, don't have overly high expectations for a product to last 20 years. Mine is used and abused as it sits in the floor of my car. Passengers kick and step on it all the time and it continues to function.

All in all I thinks it's worth the purchase.....

Buy Whistler Pro-800W 800 Watt Power Inverter Now

I HAVE USED IT ONLY A FEW TIMES BUT IT FUNCTIONED PERFECTLY. I'M RUNNING THREE SMALL AC FANS ON MY PONTOON BOAT AS A TEST FOR BEING ON THE WATER THIS SUMMER. SO FAR, SO GOOD AND RAN ALL THREE FANS FOR ALMOST 8 HOURS ON TWO 12 VOLT DEEP CYCLE BATTERIES.

Read Best Reviews of Whistler Pro-800W 800 Watt Power Inverter Here

Our float was awesome with the added lights powered by this inverter.

Thanks for the deal. Good stuff with no worries.

Want Whistler Pro-800W 800 Watt Power Inverter Discount?

I have tested our CPAP machines (2) with a portable battery and it works great. Haven't tested how long the battery will last. Product looks good with battery connectors and built in fan.

Save 61% Off

Tuesday, February 18, 2014

Sheenroad Accessory Kit Car Mount Holder and Car Charger for Samsung Galaxy Note 2 II N7100

Sheenroad Accessory Kit Car Mount Holder and Car Charger for Samsung Galaxy Note 2 II N7100Bought it to hold my note 2 so I cld see the gps on it more safely and it held up great on the 2000 mile trip. It only fell off the window twice and that was when I was removing the phone with one hand.

I would have given this a 5 of 5 but although the window mount is amazing the car charger broke after the first use. Which is fine I didnt buy it for that. And I cant really complain for 7 dollars. I will buy again if this one goes bad sell got it to me within 4 days I was pleasantly surprised.

Saturday, November 16, 2013

Husky Liners Custom Fit Second Seat Floor Liner for Toyota RAV4 for Select Toyota RAV4 Models (Blac

Husky Liners Custom Fit Second Seat Floor Liner for Toyota RAV4 for Select Toyota RAV4 Modelsgot this for the 2nd row seating area of an '09 Rav 4 because weathertech doesn't make one. turns out to be a well worthwhile buy. it fits nearly perfectly (there is little bit of a gap around the corners but not much).

I've hesitated so long in getting this. I wish I hadn't, it would have saved me from many hours of vacuuming. Well worth every penny. It makes the back seat look brand new again.

Buy Husky Liners Custom Fit Second Seat Floor Liner for Toyota RAV4 for Select Toyota RAV4 Models (Blac Now

Friday, November 15, 2013

Swan Type Battery Cut-Off Switch - Ultimate Theft Deterent!

Swan Type Battery Cut-Off Switch - Ultimate Theft Deterent!Want to save wear and tear and possible shorting of your battery cables when servicing your car? Then install one of these. Most mechanics now disconnect the battery to perform any maintenance on most cars these days to avoid shocks. the constant disconnecting and tugging / bending of the cables can lead to failure and shorts.

This device avoids all that. Long used by owners of collector cars and the like, the disconnect takes seconds to install and cutting battery power is as simple as turning the little wheel. Some switches have a small "lifeline" cable that allows only a trickle of power to keep your engine's computer alive while the main power is shut off.

A handy and inexpensive product.

this product works very well. i have a jeep that the battery was always running down installed this device and no more dead battery..very pleased

Buy Swan Type Battery Cut-Off Switch - Ultimate Theft Deterent! Now

Bought three of these and they work as advertized. The male terminal is not standard size and is quite a bit undersized. I wanted to attach neg battery cable to it but had to squeeze it down too much. The material appears to be a cast metal and the first one broke trying to attach cable. Be careful how you hold it for this operation. Was more careful with the second one and it is attached on my boat and appears to work fine. Perhaps a little fragile for heavy usage.

Read Best Reviews of Swan Type Battery Cut-Off Switch - Ultimate Theft Deterent! Here

http://www.amazon.com/gp/product/B001JE32H4/ref=cm_cr_rev_prod_title I bought 4 of these for our cars when we leave town and I don't want the batteries to die. Also a good theft prevention gadget.

The problem is the stem on the device sticks out too far and is impossible to connect to your existing cable. Room in the battery box is usually limited so it needs to be revised accordingly.

Oh, well they weren't very expensive ...

Want Swan Type Battery Cut-Off Switch - Ultimate Theft Deterent! Discount?

just what i needed, works great, used it on my old ford tractor to shut the battery off when not in use

Wednesday, September 11, 2013

AmazonBasics 175-Watt Pocket Power Inverter with 2.1 Amp USB Port to Charge iPad, Kindle, and Other

AmazonBasics 175-Watt Pocket Power Inverter with 2.1 Amp USB Port to Charge iPad, Kindle, and Other ElectronicsI really love this inverter. I've used other inverters that claim to provide 150 Watts or 175 Watts, but their claims are bogus (explained below). And to find an inverter that offers this much payload at this low price is sweet!

First of all, what's an inverter?

The electrical system in your car, boat, or RV runs on a 12 volt DC system. Your cigarette lighter outlet provides power at 12 volts DC. This is fine for things like a phone charger that have a 12 volt DC plug, but what about items that you normally plug into the wall in your home or office? Those devices run on 110 AC power. The role of the inverter is to change (or "invert") the output from your car's electrical system from 12 volt DC to 110 volt AC.

This AmazonBasics inverter provides a grounded 110 outlet for plugging in those household devices as well as a USB outlet for things like iPhones, iPads, etc. (which is a nice bonus).

So what makes this inverter different? First it's important to know that your vehicle's electric wiring isn't intended to run your toaster or hair dryer. Even though an inverter might be designed to provide a high output for larger devices (like a TV or satellite receiver), your vehicle's poor little cigarette outlet can't handle the load. I've used inverters that claim to support a higher load, and they either blow their own internal fuse, blow a fuse on the vehicle, or (worst case) don't blow any fuses and just burn out the wiring to that outlet. That's bad.

So the difference with this inverter is that it supports loads up to 130 watt through the cigarette lighter outlet. For loads from 131 watts to 175 watts, there is a set of alligator style clips to connect directly to the vehicle's battery.

There are plenty of other inverters out there that connect directly to the battery, but I've never seen one this compact and this inexpensive.

Warning: Only use the direct connection to the battery while your vehicle is parked. Don't try to prop open your hood and drive down the road watching TV.

Here's a little tip. Before you purchase any inverter, look at your devices and see what their loads actually are. Sometimes those specs are written in gobbledygook and are hard to decipher. And some devices have two loads: the initial startup load and the actual running load. The startup load for this inverter cannot exceed 175 watts. To be absolutely certain of the draw from your device or appliance, consider using something like this Kill A Watt Electricity Usage Monitor. You plug the monitor into a wall outlet and then plug your device into the monitor. The readout shows you the peak usage and the running usage. If the peak draw is under 175 watts, then this inverter is OK for you.

Bottom line, I'm very happy with this inverter. It's the first one that I've ever had any success with at this wattage. Just make sure not to overload the 12 volt DC outlet with more than 130 watts. And don't use your toaster while you're driving down the road.

The Amazon basics 175W pocket power inverter is the lightest I've seen, weighing in at only 6.1 oz. with the cigarette lighter plug attached. It is also quite small at 4" x 8" x 0.8", perfect for packing in your computer bag. Besides powering your laptop, it also includes a USB port capable of supplying 2.1A, which plenty for charging a phone, iPad or just about any USB accessory. I tested the little unit on my Dell laptop. It powered it easily. Next, I plugged in a 100W light bulb. Again, no problem. The unit has a fan that comes on as necessary to keep the unit cool. With a 100W load (the light bulb) the fan ran continuously. I found the fan to be rather loud and high pitched. In a car, you may not care but the noise level is significant at 58dB at 1 foot (measured with my audio meter). What I found odd is that the fan ran much faster when the load was reduced or removed. For some reason, the voltage to the fan must drop significantly once a load is placed on the inverter. While the inverter is rated at 130W continuous, you can't (or at least shouldn't) do that from a cigarette lighter socket.

The manual is a little confusing. It says you can run the inverter from the cigarette lighter for loads under 130W but also says for 120W-130W to use battery clamps (included) to hook it directly to the car's battery. Personally, I wouldn't advise running it over 90W from a cigarette lighter socket. At 90W output, the unit draws 10A from the socket. That's okay, since most laptop power adapters require no more than 90W. At 100W, it drew 11Amps, which is over the maximum continuous power most lighter sockets are rated (and fused). I didn't test the unit it past 100W.

If the unit was quieter, I would have given it 5 stars but for using in the car, you may be very happy and you will be hard pressed to find a more compact and light inverter.

Buy AmazonBasics 175-Watt Pocket Power Inverter with 2.1 Amp USB Port to Charge iPad, Kindle, and Other Now

The concept is simple: turn 12 V DC from your car into 120 V AC to power things you would normally plug in at home. Useful in an emergency or on road trips.

You plug this into the 12 V socket in your car (what used to be called the cigarette lighter, but most cars today don't even come with the lighter part). A little blue light comes on, and you are ready to plug something into it. I tried a radio, a shop light, and even a handheld jigsaw, and all ran fine.

It also has a USB charger port, which is nice is you don't already have an adapter for that.

I have an old, clunky-looking one piece inverter. The Amazon one looks cooler, but once you add the size of the cord it's not that much smaller. The old one is rated 150 W continuous, this one 130 W. The big difference I noted was in surge capacity. This device is rated to 175 W, while my old one is rated 450 W. It won't make a difference with most small appliances, but something with a big start-up surge or that surges for other reasons may overload this device.

It includes clips to attach it directly to the battery, which will save some loses through the electrical system, and doesn't require having any other parts of the car running to use it. Do use caution when attaching anything directly to the battery.

While not the ultimate in inverter technology, this is a useful thing to have in your car in an emergency.

Read Best Reviews of AmazonBasics 175-Watt Pocket Power Inverter with 2.1 Amp USB Port to Charge iPad, Kindle, and Other Here

Disclaimer: I used this inverter in extreme conditions not normally encountered by most users. Please take this into account when reading the review.

**********

General Overview

I recently took part in a meteorite search expedition in the desert of Oman that was organized by the local university and natural history museum. The expedition consisted of 18 days in the desert with only the supplies of food, fuel, water, etc. that we brought with us. Temperatures ranged between 6C (42F) to 35C (95F), humidity ranged from below the detection limit of our equipment up to around 90%, though it never rained. In many cases, winds were strong and drove substantial amounts of dust (often sheeting off of the vehicle windows like water). After a matter of hours the interiors of the vehicles were liberally coated with a thick layer of dust, which remained and grew thicker during the entire expedition. Dust and heat are the mortal enemy of electronics, and it's not uncommon for otherwise-robust devices to die horribly in the desert.

I purchased the inverter to run certain basic electronics like battery chargers for AA-size batteries, computers, mobile phones (no service in the desert, but it's good to keep them topped up), two-way radios, and scientific equipment, and other similar uses. Due to the hostility of the environment, I was expecting that this inverter would be "disposable" and didn't expect it to survive the trip.

I was pleasantly surprised to discover that not only did the inverter survive the trip but it did remarkably well. While I can't explicitly recommend using the inverter in extreme environments as it's not rated for such purposes, it performed well and would likely serve the average person very well in more ordinary conditions.

**********

Tech Details

Like most inverters produced for the North American market, this one produces 120V 60Hz AC power with a "modified sine wave" waveform that differs from the ordinary "true sine wave" waveform produced by mains power available from your wall socket.

In general, modern electronics that have "worldwide" power supplies (that is, they accept ~100-240V AC power) will have no problems at all using the power produced by the inverter. Laptop computers often have such power supplies and should work fine. Incandescent light bulbs and other simple resistive loads will have no problems at all, though you should make sure they don't have a startup surge current that exceeds the ability of the inverter or the car's electrical system to supply. Electric motors are unlikely to work as effectively with inverter power (if they run, they'll run less efficiently, hotter, etc.) and shouldn't be used with inverters. Many motors often have very high surge current when starting, which may overload the inverter. Certain devices like compact fluorescent light bulbs may or may not work well. You should test them beforehand. Your mileage may vary.

When in doubt it's often more efficient and a better idea to use electronics designed for 12V power directly (such as 12V CFL light bulbs, as often used by RVers, or air pumps that clamp directly to the car battery) rather than using an inverter to power household-voltage devices. You can often find a DC-to-DC converter for things like laptops, mobile phones (particularly those that charge using 5V DC, such as those using a USB plug), etc. that allows you to use or charge them using the 12V power socket in a car (or using battery clamps) directly rather than using an inverter, though not everything (like chargers for a $70,000 x-ray fluorescence analysis scanner) has such converters and an inverter is a necessity.

I experienced no problems with the "modified sine wave" produced by the inverter.

There is a small fan on the side of the inverter to aid in cooling. It will come on automatically when needed, so ensure it's not blocked. I found that the inverter starts with the fan off, then switches it to 100% when the internal temperature reaches a set point. After a minute or so, the fan turns off again. This repeats for a few minutes until the inverter gets a sense of how effective the fan is and then adjusts it as needed to maintain a good working temperature. When operating at full power the fan has a distinctly high-pitched whine that some may find slightly annoying, though it can often be masked by turning on the car radio and/or putting it in the rear of the car.

If you listen very closely you can hear a rapid clicking sound (though it's quite faint and you need to have your head very close to the inverter to hear it -it's not the least bit disturbing or annoying beyond a few centimeters from the inverter) as the internal electronics do their work.

The lighter socket plug and battery clamps are both of good quality and connect firmly and securely.

**********

Safety

It appears that the inverter does not have inrush current limiting on the 12V DC side, so you may experience some sparking when connecting the included battery clamps to the battery as it needs to charge its internal capacitors. This is evidently normal and doesn't pose a problem insofar as the electronics are concerned, but you should ensure that the battery is well-ventilated (as car batteries produce explosive hydrogen gas when charging though not when being used) when connecting or disconnecting the battery clamps. You should use the same safety precautions as when jump-starting a battery.

It's probably a good idea to connect the inverter to the 12V power source first, ensure the blue "on" light is on, and then connect the turned-off load to the inverter, and then turn on the load. It's probably a bad idea to have the turned-on load plugged into the inverter when you connect it, as this would require a substantial rush of current to power.

Additionally, the inverter is not rated for outdoor use, so don't expose it to rain, moisture, etc. In my case, the major threat was dust. After using the inverter for a few hours (regardless of whether it was used inside the car with the power socket or when used outdoors and clamped directly to the car battery) I would unplug it and blow sharply into the vents to clear out accumulated dust. While this worked fine, it's probably not a good idea to expose it (or other electronics) to dust for extended periods of time as it would have a harmful effect on the electronics and the moving fan.

It's not clear if the inverter has an internal fuse -the supplied lighter socket plug and battery clamps are unfused. There does not appear to be any sort of user-accessible fuse on the device.

**********

Possible Improvements

The only three improvements I'd propose for such a device would be to eschew the fan in favor of an aluminum body that passively dissipates heat, to have inrush current limiting on the input side to minimize sparking, and a user-serviceable fuse. The former would eliminate the one moving part and increase durability a bit, though likely at increased cost. The second should be relatively cheap and easy to implement but isn't a major issue. The third helps prevent potentially unsafe conditions and allows the user to replace the fuse if it burns out.

**********

Conclusion

The inverter performed really well in the Omani desert in extreme conditions and is likely to perform well in less-extreme conditions. The price is quite good, it's backed by Amazon, and includes both the 12V lighter socket plug and battery clamps. It's comparable in terms of output power and quality to other similarly-priced inverters.

It's a good general-purpose inverter and I strongly recommend it.

If you need higher output power or pure sine wave output, you'd do well to look at other, more suitable products.

Want AmazonBasics 175-Watt Pocket Power Inverter with 2.1 Amp USB Port to Charge iPad, Kindle, and Other Discount?

I took the new unit out of the box and it blew a fuse in first vehicle, tried a second vehicle and it blew that one as well. I had no accessories plugged in at the time. Unit failed right out of the box.

Monday, July 8, 2013

Swift Hitch SH02 Portable Wireless Camera System

Swift Hitch SH02 Portable Wireless Camera SystemI've only used this twice so far and both times it has proven to be a real treat to have, as I didn't need the wife's help to get our trailer hooked up to the truck. I was able to back up and stop in the perfect spot the very first time. No more in and out, in and out, move an inch to the left, no the other left and so on. Anybody that has a trailer knows exactly what I'm saying. It was easy to charge both units, easy to set up and very easy to use. The magnet works great and I know I'll use the suction cups on the back of our trailer sooner or later. My only bit of disapointment was trying to see the screen when it is really sunny outside, as the brightness seems to make the actual picture very, very light gray and tough to see the screen clearly. I've not yet used it in the dark, but I'm sure it will be great there. I'm really glad I went with the SH02 model rather than the SH01, as the carry case with the foam protection around each piece is great, with all the charging cords and everything needed to use this set-up was in there, also I wanted the suction cup set-up as well. In my opinion, it was a good deal for the price!

PLEASE READ THE ADDITIONAL COMMENTS ATTACHED TO THIS REVIEW, BEYOND MY ORIGINAL POSTING.

We bought the kit that included the suction cups which are needed for vehicles with fiberglass hatches, tail gates, etc. The suction cups are connected to a triangle metal plate which substitutes a metal plate for the camera unit to stick to. The suction cup adapter fell off the glass window of a Tahoe. We then wet the suction cups with basically the same result. The magnetic base camera unit has a tendency to slide on all metal surfaces that I tried. This is not good.... The actual magnet in the base of the unit is recessed ever so slightly so that actual metal to magnet contact is not achieved. The magnetic "force" causes some magnetic field to hold it in place but the vibrations from backing up the car cause it to slide. In other words, the magnet is not strong enough to hold it in place. I called the manufacturing company and they had no helpful suggestions. I am going to try and remove the magnet and install a thin spacer to raise the actual magnet above the camera's metal base. That way, the actual magnet should make contact with a metal surface. The recession in the base is very minimal, but just enough to weaken the sticking power of the magnet. I am not exactly sure how I am going to fix the suction cup issue.

Buy Swift Hitch SH02 Portable Wireless Camera System Now

This item is a nice piece of kit but has 2 important drawbacks: its very difficult to see the screen in the typical bright sunlight that many times I have to hitch; and the screen is too small to see dark detail. Part of the problem is that if the hitch itself is in shadow, the camera light sensor darkens the image to compensate for the area its receiving thus making the ball or the bar (Hensley hitch)impossible to discern. You can adjust the camera view but there are just so many places on which you can mount the camera that will also accommodate a sight angle that eliminates bright areas so that the hitch is viewable.

Read Best Reviews of Swift Hitch SH02 Portable Wireless Camera System Here

The camera works well and my husband hitched the boat by himself on the first try.

He also uses the camera when he works on the car. In the past, he would use a flashlight and a mirror to look for items he couln't see under the hood. Now he uses the camera and can also do this at night since the camera operates well in the dark. The camera is used to look up into the fireplace, under the house, in the attic and for lost toys under the bed and couches.I recomend this to everyone.

Want Swift Hitch SH02 Portable Wireless Camera System Discount?

About half the price of factory option for a backup camera. Plus with the 10h li battery life of this second generation (SH02) camera, I can use it for wireless nighttime security camera of my campsite when camping in the popup. Hey raccoon, get away from that ice chest!. Can move the camera to the back of trailer to assist in backing into campsite as well. Oh, the included custom foam cut case is top quality, too.

Save 8% Off