Delphi SA10001 XM SKYFi Boombox

As others have noted:

PROS:

Decent sound, long antenna cord (20'), compact design, clean aesthetics.

CONS:

Flimsy volume control, antenna can't be attached without removing the battery compartment cover, and VERY ANNOYING high pitched hum that makes you think you're listening to AM radio. Unless you are willing to put up with this and need the portability, you're better off buying a home adpater and running the receiver through your home audio setup.

I bought my first XM 3-4 months ago and love it. I enjoy having the cable news at my finger tips and endless static free music where ever I go. The first thing I noticed was that all the chatter from the local radio adds and DJs was gone. Ahhh! what a relief. My only frustration was that I couldn't take this format with me; my old boombox was burdened with the same old adds and limited format. I'm thrilled Delphi has brought this out; I the tunner, car kit and boom box yesterday. My Sony, though very good is going to ebay. I've traded up.

Delphi has solved the problem with a product that is very well engineered. The sound of this boom box is very full. The tunner is great; love the all the display info and options. The satellite antenna wire stores inside the base (in case you don't need to run it to a window .. which I haven't had to do yet .. maybe when we go out of town).

I'm very pleased.

Buy Delphi SA10001 XM SKYFi Boombox Now

Delphi must have made an attempt to improve this model. Neither unit I bought had the high-pitched noise described by previous Amazon reviewers. But both units I received do have an AC hum when using the power adapter, and both have another noise -a repetitive, low-level clicking sound.

The noise isn't noticeable if the volume level is set above 6 or so, and if the boombox is placed a few feet from you. But if you listen at low volume with the unit close by, you might find the incessant click-click-click quite annoying. Classical music fans may find this unit completely unacceptable. At low volume during the quieter passages of classical music (XM channels 110, 112, and 113), the clicking sound actually breaks up the audio.

I unplugged all wireless devices in the house (they supposedly can cause interference with satellite radios), but that didn't solve the problem, even with the units placed well apart in different parts of the house. I suspect the clicking has more to do with the refreshing of the SkyFi 2 receiver's digital display than it does any external interference -it does appear synchronized with the scrolling display when you have it set to scroll.

I understand the SkyFi 2 receiver is not to blame, and that the receiver works well with other home or car audio kits. So, apparently, it's the Delphi boombox.

And there's another overall audio weakness in the product. In spite of the sales talk about the beefy, dual-cone speakers, the units sound like cheapo drugstore boomboxes. Actually, they sound less like boomboxes and more like "woof" boxes. Besides bass being practically nonexistent, harmonics in the plastic cases (sometimes called "case resonance") create a lot of cheap-sounding, mid-range woofiness. That has the unfortunate effect of rendering some talk programming -especially vintage recordings on the old-time radio channel and the comedy channel -almost unintelligible in places.

(I did manage to improve this problem a little on one of our units by removing the pop-off speaker grille covers, and by lining the boombox's interior with peel-and-stick felt to deaden the woofy harmonics. I don't recommend anyone try this. Besides possibly voiding the warranty, there are electronic components inside that could cause a nasty shock or could easily be damaged, and there is a heat sink inside that felt must be kept well away from or smoke or fire may result.)

If this is the only experience you have with satellite radio, you'll go away thinking it sounds little or no better than local AM radio. But -unless you're a classical music listener -it's not completely bad. Just wait for some heavy discounting before buying one, and make sure that you're willing to put up with some noisiness, and audio quality that's a little cheap-sounding.

For the money -especially the MSRP the unit originally sold for -it should have been better.

Read Best Reviews of Delphi SA10001 XM SKYFi Boombox Here

Boombox is nice, light weight, easy to move around. We got an antenna error and discovered (after much frustration and no help from Delphi or other merchants) that you must have the batteries in the unit even when using the plug for power. This eliminated our antenna error. But once that problem was solved, we love the unit!

Want Delphi SA10001 XM SKYFi Boombox Discount?

This thing is a HUGE dissapointment. There is an awful high pitched tone that you can hear behind the music. The only way to avoid it is to turn up the music so loud that it drowns the buzz out. If you listen to classical or jazz forget about this boombox. If you don't like listening to your music super loud forget about this boombox. It will drive you crazy. Listening to talk on this is awful. The buzzing will drive you crazy. It is like listening to a distant am station. I can't believe this thing is being sold on the market. It needs to be recalled and the problem needs to be fixed. Many people have had problems with this box and Delphi refuses to acknowledge the problem even though they know about it and have received many complaints. Don't buy this boombox. It is a waste of time and money.

Odyssey Batteries PC310-P Powerports Battery

If you use your toys then you should have the best. I grew tired of replacing conventional lead acid batteries every 1-2 yrs. I have seen these go for 7-8 yrs in the same environment. I'm looking forward to the same. I bought them for 2 of my motorcycles, a BMW K1200GT and a CBR600 F4i.

Put this battery in my 1982 Suzuki Katana GS110SZ motorcycle. It is a perfect fit in the battery tray. Much better cranking power than a Yuasa. Also, there is no need for a vent line, which is a nice feature. Battery posts stay clean. No deposit whatsoever. And I'm sure this battery will last for many years to come, even if I barely use this motorcycle (600 miles a year).

Buy Odyssey Batteries PC310-P Powerports Battery Now

Ordered the battery on March 24, arrived a couple days later, march 26th. Good packaging. Had a full charge. Works fine. Only thing concerning was the manufactured date. It was a year old. To me, that's a big deal with a battery.

Read Best Reviews of Odyssey Batteries PC310-P Powerports Battery Here

Plews 75-030 Auto Shut Off 2 Quart Capacity Plastic Battery Filler

I had a hard time finding this product. I knew what I wanted, but could not find it anywhere locally, People at the automotive stores didn't even know what I was talking about. I have a boat with batteries in 4 different locations which are difficult to access. It's impossible to see how full the battery is without completely removing it. This product works perfectly. I tried it out on my car before going to the boat and it works as advertised. Filling the batteries on the boat is no longer a major exercise with water spilled everywhere. I imagine it would be great for RV's also. I would caution you to be sure to press down all the way when you are filling a cylinder. If you don't press hard enough, it may not automatically stop the flow of the water. This may be why some reviewers think the product is not working properly.

I have an electric car (2 passenger golf cart for use in my retirement community) with 6 batteries. I'm a retired single female with no 'Honey' for my Do List and it's been a real drag filling those batteries up.

This little goodie blows away that 'turkey baster' thing I was using and it automatically stops filling the cell when it's at the right level. If you've got more than one battery to fill this is for you! I love it!

Buy Plews 75-030 Auto Shut Off 2 Quart Capacity Plastic Battery Filler Now

I wanted a product that would allow me to easily refill the batteries in my watercraft. I always had trouble determining when I had the water at the proper level. The Plews battery filler allows me to easily fill batteries and get the levels correct each time. It does what it said it would do.

Read Best Reviews of Plews 75-030 Auto Shut Off 2 Quart Capacity Plastic Battery Filler Here

Great design and very easy to use. I found the shut off to work as designed. If you don't place the

filler flat against the battery hole, it can continue to pour with out the shut off but that isn't the best

way to use this product. It shuts off very well every time if used properly. Love this product. It saved me a lot of time in refilling my golf cart batteries (8).

Want Plews 75-030 Auto Shut Off 2 Quart Capacity Plastic Battery Filler Discount?

We got this to replace one we bought from a golf cart accessory house which fell apart after a couple of years. Plew usually makes pretty good products so I'm hoping this will last longer, though it only gets 4 stars because it doesn't fell as heavy duty as I'd hoped. Time will tell. As others have said, if you have batteries, especially more than one (as in a golf cart) you need this product!

Save 39% Off

OptiMate 3+ battery saving charger-maintainer

Having used Battery Tenders for years I was feeling that they weren't doing their job any more

when a 2 year old battery would not start the bike after being charged/tended. The light

on the Tender said it was fully charged but it wasn't. Having read a review on some of the

new charges decided on the Optimate 3+ Motorcycle Battery Charger. So far it fixed two batteries

that were in bikes and recovered two older ones that were waiting for a trip to the recycling center.

It's the best I have yet to use!

I had a 2 year old motorcycle battery sitting on a shelf waiting to be recycled when I purchased this. I threw it on there for a day and came back to a fully charged battery.

9/1/12

I am notoriously bad at keeping my battery plugged in but this thing keeps them alive. I am a very light rider and so my bike sits around a lot and battery is almost always dead. This unit has never had an issue recovering and making the battery like new.

Pros:

Price

Reliability

Works great

Cons:

The display lights don't tell you anything

Buy OptiMate 3+ battery saving charger-maintainer Now

Great charger / maintainer!!! I have gone through two top quality motorcycle batteries in the last few years. My local Yamaha shop suggested this product to keep my battery always charged up. The charger maintains the battery at full charge without the risk of overcharging it. From what I understand now, letting the battery sit for weeks/months to the point of dyeing is extremely hard on them.

The light indicators on this are very handy. These lights will let you know when the system is idle, trickle charging, deep charging, and trying to recover a really messed up battery when possible.

Read Best Reviews of OptiMate 3+ battery saving charger-maintainer Here

Let me start by saying this is the exact same product as the Honda Optimate 3+ charger that sells for $75 at the dealership. The charger is completely automatic and lets you know what its doing and the state of the battery at all times. I recently had to make a 100 mile trip back to the dealership with what appared to be electrical system problem. The battery tested fine and indicated it was fully charged and would hold a charge with my other motorcycle battery charger. Drove over 2.5 hours to find out the battery had a shorted cell. This will never be a problem again with this charger. Total diagnostic and testing program will bring old sulphated batteries back to life. Easy to follow instructions and comes with clamp and screw on connectors.

Want OptiMate 3+ battery saving charger-maintainer Discount?

I don't know if it'll cure all batteries, but it brought a battery back from the dead on my John Deere mower.

Hopefully, it'll save two other batteries I need to hook up, but technically it already paid for itself by saving me from having to go into town and pay twice the amount for a new battery.

If you are going out into the middle of nowhere 100+ miles and need a dependable battery for your ATV, common sense will tell you to just go get a new battery every three or four years like I do, but this deal seems to do the trick on batteries that need to be starting welders, mowers & other neglected batteries around the farm, ranch or meth lab. :)

I noticed they bumped their price up since I bought mine.

The instructions were a little vague, but just looking for the green light to stay on may suffice.

There may be better ones out there, but I'd buy this one again.

Comapre prices, if you have the time.

Save 12% Off

Kat's 24150 150 Watt 4"x 5" Universal Hot Pad Heater

I purchased several sizes/wattages of these hoping to find the right sizes for my snowblower and ATV engines. The trick is to find flat open spots on or near the bottom of the oil reservoir, clean it well, and stick the appropriate size of heater there. The instructions say DO NOT use gasoline or acetone to clean the spot, and you must believe it. The first one I put on I used acetone (I know but it's all I had) to clean the spot, and the adhesive does not stick well. On the others I used mineral spirits, and they stick like glue. They stink a bit when heated, but that is going away with use. I also used a 50 watt one to keep a bird bath de-iced, and it worked perfectly down to 5 deg F. No thermostat, so a good idea is to just plug them in a few hours before you use the equipment, or put them on a timer. But, they don't seem to overheat if you put the appropriate wattage on the appropriate size of reservoir and that's a guessing game. Five stars because they are inexpensive and do exactly what they are meant to do.

This works pretty well on the oil pan of my vehicle. It does not have a thermostat. It does need insulation on the back side so that it does not lose heat. I plug it in about 2 hours before I use the vehicle and it does the job of preheating. I also have one of these to keep our Moose pond thawed. The unit is submersible. So far the animals haven't eaten it. So you can use this item for a lot of things, but it has to be attached or submerged in something.It will overheat in the air, by itself. I rated it less than 5 stars because it is not insulated on one side and it does not have a thermostat.

Buy Kat's 24150 150 Watt 4"x 5" Universal Hot Pad Heater Now

put this on the oil pan of my 3 series bmw. i live in the warm south but keep this plugged in 2 hours before startup each morning. engine starts much healthier sound and 5 speed stick shift tranny shifts smoother in cold weather @ startup b/c the tranny case gets conductive heat thru the oil pan.

if you live in warm climate I would not reccomed keeping this plugged in overnight....it'd be a waste of energy and these get darn hot. I'll zap the exterior temps of my oil pan and tranny case and report back with the case temps from my infrared temp gun.

overall product works great. i did install with a bead of high temp silicon around the edge (after first cleaning the oil pan of grime with some type of solvent..acetone maybe).

Put it on a timer and let it run an hour or two before startup. its bound to reduce wear on engine. well worth the money b/c it costs mere cents in electricity.

UPDATE AS OF 12/2/2012 with the temps from a laser temp gun:

OK Here are the temps I zapped:

w/ no power to the stick-on heater

Ambient in garage = approx 68

Laser gun temp on oil pan = 68

Laser gun temp on tranny case = 68

Laser gun temp on lower block = 68

Laser gun temp on vanity cover = 68

OBDII temp from coolant temp sensor in head = 66.3

After turning on pad for 1 hour:

Ambient in garage = approx 68

Laser gun temp on oil pan = 94-86 depending on where I zap it

Laser gun temp on tranny case = 72

Laser gun temp on lower block = 78

Laser gun temp on vanity cover = 69

OBDII temp from coolant temp sensor in head = 68.0

After turning on pad for 2 hours:

Ambient in garage = approx 68

Laser gun temp on oil pan = 92.6-99.5 depending on where I zap it

Laser gun temp on tranny case = 75

Laser gun temp on lower block = 83.6

Laser gun temp on vanity cover = 70.7

OBDII temp from coolant temp sensor in head = 71.6

After turning on pad for 2.5 hours:

Ambient in garage = approx 68

Laser gun temp on oil pan = 93.5-102.2 depending on where I zap it

Laser gun temp on tranny case = 75.5

Laser gun temp on lower block = 83.9

Laser gun temp on vanity cover = 71.6

OBDII temp from coolant temp sensor in head = 71.6

I'm using this heater in Texas to warm up oil before short trips. So what do these numbers indicate to me? They indicate that the oil temp is at best climbing 30 degrees over abient temp. Thats not as favorable as I was hoping. I'm going to put another 150 wattt on the oil pan and see if I can get more heat to the oil before startup b/c short trips w/ cold oil is not good for the engine.

If you live somewhere up north where its cold and get snow then I would highly recommend the 250 watt pad if your oil pan holds enough oil. From what I hear a 250 watt will warm the oil and possibly provide enough heat to thaw snow and ice from hood and windshield. From kats I believe the specs on side of heater for a given oil capacity are as follows:

100 watt for 2-5 qts engine oil

150 watt for 5-8 qts engine oil

250 will for 8-20 qts engine oil

p.s. the silicon sealant I used was from auto parts store and it was black in color. the sealants have a heat rating on back and the black stuff was rated to 400 deg F.

Read Best Reviews of Kat's 24150 150 Watt 4"x 5" Universal Hot Pad Heater Here

This is a great product. I was having trouble getting my tractor to start in the cold MN winter. I bought this heater and stuck it to the bottom of the oil pan. I also bought the Katz battery warmer and wrapped the battery. From the day I installed them my tractor started like it was 80 degrees in the middle of summer. We had an extremly cold winter this year and my tractor started with no trouble everytime.

Want Kat's 24150 150 Watt 4"x 5" Universal Hot Pad Heater Discount?

I was looking at this and one of the magnetic heaters & wasn't sure which was best, so with both being ~$25 (where it's not like buying a car) I got one of each (figuring I may put one on a car and keep one for other uses). One of the places I wanted to be able to use them was on a small engine (like for a generator or snow-blower) and with those having an aluminum block (where the magnet won't stick) I got a steel plate ~1/8 thick I could bolt up to the engine base. I put the magnetic heater on the plate (without it on the engine yet) & plugged it in, after 1 minute the plate seemed totally cold still. I pulled the plate off and put my hand near the unit where it's base was warm, so put it back on. Apparently, the magnetic bars stick out enough that it leaves a 1/16-1/8 gap between the base creating the heat and the attached plate. So the heat either needs to "jump" the air gap or all be funneled thru the little magnet bars to get where you want it to go. If we're talking about outside temps of 20 or less where you want to warm an engine, trying to warm the air around it doesn't seem great to me.

So I then tried placing this "heating pad" unit on the same plate (after cleaning it as per instructions and putting a bead of silicone around the edge that needed to dry). With it plugged in, the plate is too hot to hold within 1 minute (and was at 200 degrees within 2 minutes). So it heats fast, but if you're not using it on something big enough to easily absorb all of it's heat you may have an issue with it NOT have any temp control (although they say it has such).

So my conclusion is if you want good heat transfer, the heat pad unit seems better with full contact. If you want an easy to slap-on or removeable unit, the magnetic one may work.

Just be sure to look at what you plan on mounting this on. If thinking of your oil pan, you want one that is smooth with no "ribs" or ridges and has a flat surface the size of this. They say to "use a roller to be sure of no air pockets under it" and if the pan has ridges or you try to go around a corner, you'll likely have issues with it sticking well. Most engine blocks don't have this big an open/smooth space for it, so oil pans may be the only good place.

Note: Both units say in the instructions "Don't place on painted surfaces because it'll damage the paint", so you want bare metal for either (even if it means striping off paint). Also if you're wondering "How do you warm a generator engine with power out (which is when you need it)?" I have a deep cycle battery & inverter that should work for ½ hour, then with the gen going I can recharge.

Save 33% Off

StreetWires BEST 4 Gauge BLACK Power Cable ZN3-4100BLK BY THE FOOT

• ZN3 - Streetwires BEST Performance Cable...BY-THE-FOOT (4' Four Foot Min Purchase Requirement)
• CEA-2015 Compliant
• Translucent BLACK jacket with silver-colored tinned COPPER wire
• Poly Flex insulation - Optimized Stranding
• 220 Degree (F) Termperature rating - resists battery acid, oil, and gasoline

Streetwires is an overall good audio company and they are one of the few that actually uses 100% copper wire, none of that copper clad stuff that the cheaper companies are putting out.

Save 99% Off

Goal Zero 21004 Switch 8 Silver Solar Recharger

This is very good, delivers good charge, and was light and easy to use. It does not include the solar charging tip so I am trying to figure out how to couple it into my Nomad solar charger like it says you should. However, for those who just want an easy battery backup, this should be perfect.

I love these little lithium batteries! I use these both while at the office to recharge my smart phone when I am running on empty and while hiking to power up again my camera/electronics when they need a top off. Unlike another reviewer I have not felt that the charges took a long time, actually they were excellent in recharge time. I plugged in my iPhone 4 at 55% battery capacity and got to 76% in only forty minutes, with three of the four bars still showing on the switch 8, and 92% after just under an hour and a half with two bars still left on the switch 8. It does have its limitations though. It only boosted my iPad4 battery charge by 11% after completely exhausting the battery which got actually pretty warm in doing so. However, I have really enjoyed these little batteries.

The added plus with these puppies is that they are light weight at 3.2 ounces, much lighter than other alternatives on the market. Although not mentioned, you can daisy chain two of the these together to provide more charge to bigger, more power hungry devices. Nifty huh?! Another benefit is that when hiking, I can plug in both the switch 8 AND my Guide 10 Plus battery recharger at the same time on the solar panel since they use different ports. Nice feature. A little suggestion is to buy a 4 port micro USB hub (about 1.6 ounces) so you can plug in two daisy chained switch 8s to four USB devices so I can recharge them at the same time while I sleep so they are all ready for the next day on the trail. HIGHLY recommend these little puppies! Go Goal Zero!

If Goal zero reads these, consider doing something similar in a form factor that carries two to three times the charge (again that can be daisy chained) in a light weight lithium battery form factor for those that need more power but do not want to carry around the new lithium Sherpa 50.

Again, very pleased with the switch 8s.

Buy Goal Zero 21004 Switch 8 Silver Solar Recharger Now

Purchased this to charge my phone and other devices on the go. Once the Switch 8 was charged, I plugged in my phone which I purposefully let drain to zero. Two hours later, i had charged to less than 20%. Rather disappointing.

Read Best Reviews of Goal Zero 21004 Switch 8 Silver Solar Recharger Here

Works well for when you are out in the middle of nowhere and you absolutely need a charge for necessary electronics. Charges itself via usb from either wall outlet or through another device. battery indicator lights on the side come in handy for obvious reasons. could use some water repellecy somehow which would make it greater for outdoors use. to each their own.

Want Goal Zero 21004 Switch 8 Silver Solar Recharger Discount?

Easily slots into a rucksack or pocket, using it more that I ever though.. Great design and works very well

Save 20% Off

Rearview Mirror DVR with Dual Swivel car Camera video recorder with 3.5'' LCD screen DVR35C2

• How do you prove to the traffic police what really happened, in case a road accident occurs? No lawyer can help you more effectively than an in-car DVR does. And no DVR is more useful than this one.
• Combining a Rearview Mirror with a powerful DVR, this product allows you to get a glimpse of what's behind you, and records the road situations both inside and outside the car, at the same time. The two cameras are both 180 degree rotatable so you can record at the best angle you want. You can also switch between single or dual camera display/record. Better yet, the two cameras even come with nightvision for you to record videos at night!
• Installing this Rearview Mirror DVR couldn't be simpler, as it is designed to easily clip onto your pre-installed rear view mirror. It will start recording from the moment the device is turned on. You can record in two Different Modes, normal continuous recording, or cycled recording for saving data space. With this great little gadget, now everyone from general drivers, police officers, journalists, detectives, lawyers, taxi drivers can have the evidence they need that will hold up in court.

The description for this item says it can handle SD cards up to 32GB and so I was was expecting a product with plenty of recording capacity.

Well it turns out that what you actually get is something can only record up to a maximum of 5 minutes at which point it starts recording again over writing the previous recording.

Now you have an additional source of stress at an incident did my camera capture the incident and is it just about to to delete the recording?

Whilst most incidents are over in just seconds it is entirely unreasonable to market a product that has such a short recording time with no option to save old recordings in the unit itself. If it was making 5 minutes recordings until the card was full that would be OK but as it stands although you can use a 32GB card you can only ever make about about 0.5GB worth of recordings. In the heat of the moment would any of us be sufficiently alert enough to immediately check the camera and press stop before it hits the 5 minute mark or would we be focusing on the more important aspects of any incident?

Customer support were polite but failed to come back with any reply to these concerns even though I asked on 2 separate occasions and they promised to look into it.

I was going to get one of these for my partner but will now be looking elsewhere.

Wolo Model 330 Oooga Sound Fun 12 Volt Horn - Pack of 1

This is essentially identical to the Carrand Old Timer Horn, but at a more reasonable price. Both the Wolo 330 and the Carrand are made in China. I have both, and apart from the painted-on chrome of the Carrand Old Timer Horn, the construction, electric motor, and materials are the same. My Wolo 330 sounds a lot raspier than my Carand. The sound that comes out of the Wolo 330 can be described as "oooorh," and definitely not "ahoogah." I think this is because the electric motor is either too powerful, or it's actually rated to run on 6 volts instead. Quality control varies, because I've measured impedance on several units, and they measured anywhere from 0.7 ohms to 2 ohms! I lowered the voltage and current by putting a 1.75 or a 2 ohm resistor in series at the positive (+) end, and backed off the adjustment bolt at the back of the horn until I got the classic "ahoogah" sound. Don't do this yourself; have your mechanic install it for you.

kkrome's review is dead on. After purchasing the ooga I was definitely disappointed with the high pitched sound. I stated searching for others with this problem and found kkrome's review here on Amazon. I check Amazon a lot as I am a 'Prime' member. He was spot on! Do what he says and you'll be pleased.

I remembered about calculating current / wattage so did a search engine check to make sure of the formula's. Using my laptop, I calculated my needs with simple arithmetic using the 'knowns' and solving for the unknown, much easier than it sounds. I used kkrome's 2.0 ohm suggestion and factored it in which helped me come up with the amount of wattage my resistor needed. I went to Radio shack and for 1.99, I got a two pack of 1.0 ohm resistors. The highest wattage they had was only had 1.0 ohm / 10 watt (wattage is the amount of heat it can give off). I calculated that I needed more wattage but that was all they had in stock.

Not to be deterred, I got to thinking that since I am not hooking mine up to be a full time horn for actual emergencies, as in, NOT hooked up to my steering wheel's horn, (This means using a separate dedicated button to press for the ooga). My ooga is only for amusement, so my horn would never be used long and continuously which would mean that the 1.0 ohm / 10 watt would not overheat and fail. If it does, so what? It's only 1 dollar. (got a two pack remember?)

In less than 5 minutes, I cut the 12 volt hot wire going directly to the back of the ooga and soldered in the 1.0 ohm/10 watt resistor. I tried my horn and could tell the resistor was doing its job so I then adjusted the horn. With a tiny tweak of the adjustment screw on the back, it came to life with a more authentic sound. It has the low growling sound and actually sounds "AH-OOO-GAH". I stopped with just putting in only one 1.0 ohm and did not use kkrome's 1.75 to 2.0 ohm resistor suggestion. So before you go to putting in the full 2.0 ohm's, start with just 1.0 ohm and move up in ohms if needed.

I mounted my horn on the left hand side near the fire wall in front of the driver, well away from splashes and such. I am driving a Dodge 1 ton.

If you're looking at this ooga, then you must be a tinkerer unless you were going to pay someone to put it in to begin with. This is an easy project. FWIW, Do yourself a favor, put it somewhere on top so you can get to it easily. My location doesn't require me to get greasy because it's all right there.

I gave this horn 3 stars because you must do some tinkering to get it to sound right.

Buy Wolo Model 330 Oooga Sound Fun 12 Volt Horn - Pack of 1 Now

I do agree with Kkrome's very interesting review that the sound you most often get from this horn jumps up to pitch too fast. I found, with a little practice, that a relatively quick push worked better, didn't seem to get underway quite as easily. Of course the antique horns did the proper "ah-OOOO-gah" every time. I've had these put on two cars. (I'm no mechanic! I have Ziebart's guys do it.) The last time, it was put dead center behind the grill (in front of the radiator. My LAND is it loud when it is prominently placed like that. If you're wanting to use is as more of a "friendly greeting," I'd have it put off to the side or farther back. These aren't the most durable horns in the world. I had one on my 2005 (Toyota Avalon people are VERY surprised to hear that sound coming from that car!), and after a year or two, the relay failed and needed to be replaced. Later, I had to replace the entire horn. I traded to a newer Avalon (left the horns on the other car) and got another in 2010. That one lasted all of 14 months before it rusted up and failed. I suspect its prominent location may have contributed to that, and would suggest placeing it where it's less exposed to moisture. In search of a more authentic sound, I replaced the failed one with a FIAMM ooga horn. That's been in only a couple of weeks, but for the record, the Wolo one sounds better. (Time will tell if it lasts any longer.) If the FIAMM lasts, great. If it conks out, I'll either check out another brand, or go back to Wolo.

Read Best Reviews of Wolo Model 330 Oooga Sound Fun 12 Volt Horn - Pack of 1 Here

I had a aoohgaa horn about 25 years ago, i thought this one would be simular but the sound produced is a more high pitched and not giving the same effect. This horn is about half the size of the original horn i had and i would say 1/4 the sound quality.

Want Wolo Model 330 Oooga Sound Fun 12 Volt Horn - Pack of 1 Discount?

My husband recently installed this in his car and loves it. It was a fairly simple installation and works just as promised.

Save 55% Off

PAC PAC-200 200 Amp Power Relay

So far I have 4 of these in 4 ea. 1 year old trucks running optima D31 batteries and inverters inside, along with this isloator model to prevent load on the truck's starting battery. One truck is equipped with dual D31's for extended inverter runtime.

With 48 truck-months of usage we've had no failures or trouble of any kind, if you are interested we also wired two trucks with the ability to jumpstart themselves using this (it's rated for 300A surge). It does mean an extra wire and switch inside the cab but beats bringing the jumper cart out in the weather.

During the year of use, there have been no more emergency jump starts, no more dead trucks on monday, and the inverter systems have run fine. With the extra current from the alternator we can run the inverters (I'll admit a hodgepodge of models purchased at different times) for extended periods of time as needed to support heavy power tools to cell phone chargers.

Drivers do appreciate the "clunk" this isolator makes when engaged. The audible noise lets you know the two electrical systems are tied.

I would recommend a shunt style ampmeter if room permits.

Install as described, No worries...Koool to hear switch clunk when you turn on accessory! Solid sounding, well made...

Buy PAC PAC-200 200 Amp Power Relay Now

You need one of these for that second battery install. Easy to install, no worries...

Read Best Reviews of PAC PAC-200 200 Amp Power Relay Here

Ive had this on my sc300 because a alternator cost 230 and a battery is 160 for the car so i want to avoid paying that out AGAIN! i bought a kinetik 600 battery and this and niether one of them has went dead yet. now its not going to eliminate power lost after about 40mins at night my lights still start to dim.but as long as my car still starts up this rely is doing its job

Want PAC PAC-200 200 Amp Power Relay Discount?

Huge fan of the relay. Not only does it save the battery up front from dying out on me, but if the battery up front ever dies, it's a flip of a switch and boom! Jump start with no cables. Little extra wiring, but so worth it. I use it to isolate three commercial grade batteries from my optima red top up front, and it works wonders!

Save 45% Off

New 2.5" HD Car LED IR Vehicle DVR Road Dash Video Camera Recorder Traffic Dashboard Camcorder - LC

• Support SD/MMC card:up to 32GB
• 6 LED's, support nightvision
• please insert the SD card before recording. This camera has no internal memory and does not come with a SD card.
• Because the DVR is DV5v input, please use the attached car charger. it have adaptor 12V/24V transfers to 5V already.

Sound is not the best quality, device make noise by itself, you can hear it when video is recorded in quiet room. Car radio on video was on pretty loud.

8 gb = 2h+

Buy New 2.5" HD Car LED IR Vehicle DVR Road Dash Video Camera Recorder Traffic Dashboard Camcorder - LC Now

I think that a car camera is some thing ever car should have. the video has good qualitly and the sound it alright but only good for the cab of the vehicle, but did not expect anything superstar. all in all its a great camrea to have for that just in case. you should get a 32GB card so you can have about 10 hours of video. im not really for sure but i do think that it dose delete the old files and make new ones if its runs out of space but not really sure. have not really run it to that problem just yet. ill update it I find out.

Read Best Reviews of New 2.5" HD Car LED IR Vehicle DVR Road Dash Video Camera Recorder Traffic Dashboard Camcorder - LC Here

I bought one of these to use as a storm footage camera. I am a professional storm chaser for the National Weather Service. I have one of these on my windshield to capture tornado and storm footage. Works extremely well. Not the clearest picture quality but for 28 bucks I am not complaining. The quality of the picture is comparable to most cellular phones. Not too shabby. It works well for exactly what it was intended for so if your looking for a good bang for the buck then this little guy is for you. I don't think you will be disappointed. Only draw back is you have to by an SD-card. It DOES NOT come with the card and without the card this device will not work.

Want New 2.5" HD Car LED IR Vehicle DVR Road Dash Video Camera Recorder Traffic Dashboard Camcorder - LC Discount?

after 3 day he stop work. not power on and display not working, its very horible. not buy this DVR

Save 89% Off

Had a cheaper camera that only accepted 2GB SD cards and after recording would have to run that video through software to enhance, de-interlace, and so on. That had no audio.

This camera though had audio which is awesome and the video can be taken straight from the card and posted without running through software to enhance if you don't want to.

First contact with it was weird in that it the default language was Russian but reading through the small instruction sheet was able to change to English and run with it.

Power cord is long enough to run from the plug-in, under the driver-side dash, up under the trim, across the top and to the unit so you don't have that 'hanging' from the mirror. Dead give away something is attached to the window (which is technically illegal in Minnesota).

Would recommend as a 'gotta have something' to record. Am currently trying out the different 'types' of video quality and should report back on that.

eForcity AC Wall and Car Charger with USB Cable for 1GB/2GB iPod Shuffle

• Compatible With Apple: iPod shuffle 2nd Gen. 1GB/2GB.
• Valued combo includes: 1 X USB Data/Charging Adapter/1 X USB Travel Charger Adapter/1 X USB Car Charger Adapter.
• Generic/Aftermarket
• Accessory Only, MP3 is not included. Note: Needs to pair with a USB charging cable(comes standard with iPhone or iPods originally). Additional USB charging cable is available for purchase separately.
• Material: Synthetic Leather. Bonus: Leather Lanyard with matching color are included. This form-fitting case protects your iPod investment!

Just what I needed to recharge my shuffle pod in the house and car. The short cord is something that is hard to find and helps greatly hooking up to my car stereo.

Buy eForcity AC Wall and Car Charger with USB Cable for 1GB/2GB iPod Shuffle Now

Every item worked great for my gen 2 shuffle. The car charger and wall charger work very well even for other items such as a phone and I pod touch. Can't beat the price. I had the item in a few days. I will buy again if I lose or break my cords.

Read Best Reviews of eForcity AC Wall and Car Charger with USB Cable for 1GB/2GB iPod Shuffle Here

I purchased this wall and car charger in order to "power up" my ipod, which is a much newer version than my previous one. Not only does it work for my ipod, I was delighted that it also works with my Nook! SWEET! Now I only need to bring one cords with me when I travel the roads!

Thanks!

Nat G

Want eForcity AC Wall and Car Charger with USB Cable for 1GB/2GB iPod Shuffle Discount?

Wow great shipping first of mine to come in. Product was exactly what i needed to use my shuffle again lost my small charger and it is up and going helping me work out!Thank you

Save 38% Off

I ordered this for a co-worker along with my larger order. She lost her original charger, and was finally able to use her Shuffle today after it charged.

USA Spec Pa20-gm 2007-2009 Gmc/chevrolet/cadillac/pontiac/buick/hummer/saturn Ipod and Iphone Inter

• IPOD interface to connect, control, charge and play an IPOD through a factory radio
• All plug and play harnesses for easy installation
• Adds additional single stereo Aux input to hook up another audio device
• Song up/down Playlist/disc select, shuffle and random play features all control iPod
• Auto memory feature - Auto locates last song listened to on each play list

Easy install, works great to add an aux input and retain satellite radio functionality. I just set it up using the RCA jacks, as the iPod interface didn't like using an adapter for an iphone5

Buy USA Spec Pa20-gm 2007-2009 Gmc/chevrolet/cadillac/pontiac/buick/hummer/saturn Ipod and Iphone Inter Now

Says that the item is for iphone, but it is not!!!I have an iphone 4 and the cellular noise interference is very noticeable and annoying. DO NOT BUY IF YOU HAVE AN IPHONE!!!!

VG Candy Red Portable Semi Hard GPS Case with Removable Carbineer for Garmin nüvi 265W/265WT 4.3-I

• VG durable GPS carrying case, designed to fit your Garmin nüvi 265W/265WT 4.3-Inch GPS
• Compact yet roomy to accommodate a wide range of accessories such as cables, chargers, and batteries
• Shock absorbing case material cushion and protect your GPS from bumps, dents, and minor scratches
• Elastic restraint straps help keep your GPS unit securely inside the case and prevent it from falling out
• Removable Carbineer allows you to conveniently carry the case on your belt loop, backpack, or bag strap

very nice semy hard case for my garmin gps hase extra x-tra places for sd card has a

hevy clip i use to hook on my camera case when not in usethe only thing i wish it had

place for all the cords

Save 63% Off

Camco 55572 18" 90 Degree 50 AMP Male/50 AMP Female Powergrip Locking Adapter

First off, this adapter is very well made, heavy and well put together.

Can't agree to the other review. I ordered this for my RV and because of my power inlet having the door open from bottom to top, this adapter sticks up in the air when connected, not towards the ground. Called Camco and they concluded that this adapter is made correctly, my inlet on my RV is mounted wrong. The door on the inlet should open from right side to left side. After a survey from other Montana owners, everyone's inlet is mounted the same as mine, door opens bottom to top. So, my choice is to try to move the inlet so the door opens from right to left , or return the adapter.

EDIT: Upon further inspection, I found that my inlet plug was not mounted per the adapter's specifications. The adapter GROUND was on the left of the plug, and my campers inlet GROUND was at the top. I moved the inlet plug so the GROUND was on the left and the adapter works GREAT!!!!

This is a great plug, it puts almost no stress on the outside outlet on the side of the couch from the waight of the cord, the cord dont stick out past the sides of the couch and make a tripping hazard,easyer to install and remove not having to try to hold up and line up the heavy cord plug. IT IS A MUST HAVE FOR ME.

Buy Camco 55572 18" 90 Degree 50 AMP Male/50 AMP Female Powergrip Locking Adapter Now

We just traded up to a 50 amp 5th wheel trailer. When we plug in the power cord it bends at a 90 degree angle putting stress on the cord. We purchased this and now my husband (the electrician) is much happier with the way the system fits together. We did have to turn the outlet on our trailer 45 degrees so that the adapter would lock into position but that was just the way our trailer was set up and was not a big issue for him to do. Excellant purchase, works exactly like we hoped and will extend the life of our power cord by eliminating the stress on the cord.

Read Best Reviews of Camco 55572 18" 90 Degree 50 AMP Male/50 AMP Female Powergrip Locking Adapter Here

The RV end of the adapter was oriented completely wrong and made this thing useless.

With it plugged into the RV, instead of it hanging straight down and relieving the stress on the outlet, it ended up being up at around 10 o'clock. The orientation of the RV side is complete wrong. Even after removing the outlet from our RV and orienting so it was as close as possible to how the adapter was oriented, it hung at the 7 o'clock and was trying to unlock the plug. Totally defeats the intended purpose of the adapter.

If they corrected the orientation of the RV end so the ground lug was at the 12 o'clock, like every RV on the planet, it would be useful, but as is, don't waste your money.

We returned the item for a refund.

Want Camco 55572 18" 90 Degree 50 AMP Male/50 AMP Female Powergrip Locking Adapter Discount?

This is the permanent solution to a 50 amp power cord problem that places stress on the RV power inlet and the internal connections on the factory provided power cord. The item fits tight and properly into the socket on my Keystone Montana once I corrected the factory mis-install of the receptacle (this was a very easy 15 minute fix that involved 7 screws and rotating the receptacle head). Well worth the money. Package arrived ahead of schedule with no packaging or shipping issues.

Save 34% Off