NOCO IGD200HP Grey 200 Amp High-Performance Battery Isolator

I purchased this product based on experience with NOCO Technical Assistance. They replied with in a hour of a e-mail question. I had also called Sure Power but they would/could not answer my questions. This product is replacing a isolator that according to it's amp rating would not carry the current of a new alternator I installed on my motorhome. This is a large item. It is about 11" long and the instructions say to mount it in a vertical way so it has air flow over the fins. (heat rises). The studs on the old 120A Sure Power isolator had 5/16" studs and the cables were sized to fit it. The new 200A isolator has 3/8" studs so the cable ends had to be enlarged to fit the larger studs. No big deal, just drilled them out.

Do not be confused by the NOCO-USA web site. The item I received was marked "Made in China". I have no problems with this, almost everything in my Toshiba laptop is marked "Made in China" so what does it matter.

It works as expected, and because of the sheer size of the item, I expect no problems with it. It was priced right and with free freight, hard to beat.

Using this as a stepped charge controller for additional batteries in a solar and wind powered system. 3 wind turbines, 2400 watts solar and this baby will let you add new batteries to old batteries without killing the new batteries.

Figured this idea out when adding one to my RV and man does it work well!

We have 4 year old solar batteries and when we upsized our system the proper VERY EXPENSIVE thing to do was to replace ALL the batteries with more and NEW ones at a cost of $2800. Being a NON idiot, I ordered this and just added 8 new batteries and isolated the new circuits to them and the charge split with this! 3 months now and all is really sweet!

The isolator NOCO company may wise up and make this idea a selling point!

HOW TO ADD NEW BATTERIES TO A OLD BATTERY BANK WITHOUT CAUSING DAMAGE... NOCO IGD200HP, that's how!

Buy NOCO IGD200HP Grey 200 Amp High-Performance Battery Isolator Now

Bought this to protect against accidental discharge of a two battery bank system. Works as describes, and keeps my starting battery fully charged.

Read Best Reviews of NOCO IGD200HP Grey 200 Amp High-Performance Battery Isolator Here

Product looks nice. I have a Delco remy alternator which causes you to purchase an additional install kit. Even with both sets of directions, I still couldn't figure it out. It's my trucks electrical system so I need to be 100% sure I'm hooking up the right stuff. So I called customer service after having to "fine tooth comb" the NOCO website as they obviously don't want customers to call; indecently, they forwarded me "supplemental" install instructions. Now, all three sets of directions still don't give the best guidance so I ended up searching the internet again and finally got my answer on some audio websites. Product works fine but with the hassle I had to go through, I won't buy NOCO again.

Want NOCO IGD200HP Grey 200 Amp High-Performance Battery Isolator Discount?

make sure you measure the space you intend to put it in first as it is quite big. very well made

Save 52% Off

WOUXUN KG-UVD1P 136-174 / 400-470MHz Radio Handheld Transceiver

The Wouxun KG-UVD1P is a great radio. The Wouxun instruction manual is awful! Fortunately several people have gone online with instructions in English on how to operate the radio. The best advice for programming the radio is to buy the programming cable and programming software from "Main Place Company".

If this is your first radio then you must get your FCC license before you can transmit, but this is easy.

Go to eham.net for the study guide and practice exams. Take a few practice exams and then take the test.

Was initially very pleased. Rugged. Feels well in the hand. Excellent base. Funky keyboard layout. Overall, appeared to be an excellent product for the cost.

However, the UHF receive drops about 2 seconds into the transmission. Highly annoying, especially with scanning. I have not heard of other people having the problem, so likely just the one I got. Will be exchanging.

Buy WOUXUN KG-UVD1P 136-174 / 400-470MHz Radio Handheld Transceiver Now

Nice radio, small, very light, many functions, scan tones, flashlight!! 125 memories, etc.

Don`t like the scan mode, only Up or down and Prioriti channel. no skip.....

Read Best Reviews of WOUXUN KG-UVD1P 136-174 / 400-470MHz Radio Handheld Transceiver Here

This is a good radio for the price and can take a beating! Would recommend getting the programming cable for easy programming the memories.

Want WOUXUN KG-UVD1P 136-174 / 400-470MHz Radio Handheld Transceiver Discount?

I purchased one of these from another vendor for about $130 shipped. I have used it for several months, including the collar mic, surveillance kits, multiple antennas, both as an amateur radio operator and in public safety. It works fine with good audio quality, but there are a few issues:

The radio's scan feature is crippled. If the radio is in scan, and you press the button to turn on the backlight, it stops scanning. If you press the button to turn on the LED, it stops scanning. If you try to lock the keypad, it stops scanning. If you want to change which channels are included in the scan, you have to reprogram it from a computer. You can't even use the dual VFO feature while in scan mode even though the second channel is still shown on the screen, it is never checked.

The radio itself has developed a problem. Under certain circumstances which aren't entirely clear, it will occasionally completely reset itself. I suspect this is due to a power connection issue inside the radio, but for something this cheap I'm not surprised. I'm probably going to replace it and use the broken one as a base station radio.

The belt clip, where it connects to the battery, is too tight. It takes serious effort to remove the belt clip. Which would be fine, except that it's also weak. The piece that actually fits in to the battery has broken on me, necessitating a replacement. In fact, all of the plastic pieces here are of significantly poorer quality than what you would get with, say, a Motorola.

I have used the longer antenna. It's too long to use in the field, but as a base antenna it works fine and does improve quality. While we're talking about antennas, on my original antenna the plastic piece has chipped, resulting in the actual antenna coming out of it at an angle. It still works, but yet another example of poor materials. The replacement antenna, the end cap fell off and got lost, so I had to cover it with gaffer's tape.

The surveillance earpiece works fine. The surveillance microphone does not. I am told that it results in a 'muffled' sound which is barely readable. The collar mic works fine.

Save 23% Off

Stinger Power Wire Management 0 Gauge Clip

• Sold individually
• Stinger Part# SWT0B
• Fits 0 gauge power wire

I recieved my order quickly and the product fits a couple different brands of 0 gauge wire. Rockford fosgate being one of then so that is a big plus. I would have like to have paid extra for some self taping panhead screws but hey the company figures you get your own.

I would recommend this product for a clean install.

Buy Stinger Power Wire Management 0 Gauge Clip Now

these thing are great i have six differnt strands of zero gauge running in my trunk and this little thing keep my trunk somewhat organized buy them if you have zero gauge!

SUPERNIGHT (TM) RF Wireless 10-Button Remote Control Mini RGB Controller for LED RGB Strips Light 5

• Brightness adjustable
• Adjust the light soft and stable, no flickering
• Easy to install and simple to use
• Use for single color strip and LED lamps, such as wash wall lamp, glass curtain wall light
• Constant voltage and constant current output

Honestly, i loved it,, I hooked it up and it worked just as expected, ive only had 3 days though and it was doing some weird stuff, such as only staying on one color until i unplug it an plug it back in. Another thing is that it came in a whole 2 days early!!!!!

PowerBass S-412 4 x10-Inch Coaxial 2-Way Speaker Set (Pair)

• Hard to fit 4x10-Inch size isoriginal replacement for many older GM sedans and SUV's
• 0.75-Inch pure silk dome tweeter and woofer with DDC coating
• 150 Watts peak power handling frequency repsonse 58Hz - 20Khz 4-Ohm nominal impedance
• Mounting depth 2.375 inch mounting depth
• Includes speaker wire mounting hardware application guide PowerBass decal
• Removable mounting tabs fit both standard 4" and Toyota style 4" locations
• 160Watts peak power handling4-Ohm Nominal impedance 86db efficiency
• 2 - 4" 2-way speakers with mesh grille
• Kit includes mesh wire grills speaker wire mounting hardware application guide and PowerBass decal
• DDC treated paper cone 0.075inch woofer pure silk dome tweeter

fits in the rear speaker enclosures of a 98 Chevy suburban and fills the void of a blown speaker with a good speaker

Buy PowerBass S-412 4 x10-Inch Coaxial 2-Way Speaker Set (Pair) Now

i bought these speakers becouse of the price all in all they work great good sound they met my needs just fine the only trouble was shipping took forever but i contacted the company and they took care of it thanks

Read Best Reviews of PowerBass S-412 4 x10-Inch Coaxial 2-Way Speaker Set (Pair) Here

Theses speakers were purchased to replace rear speakers in my 20 year old truck. I wish I had found them sooner. They fit great and the sound is as good as the speakers they replaced (back when the weren't cracked). Delivery was extremely fast and I recommend these to anyone who needs to replace their stock 10inx4in stock speakers.

Want PowerBass S-412 4 x10-Inch Coaxial 2-Way Speaker Set (Pair) Discount?

Fair quality, good sound; great fit for replacement OEM speakers in Suburbans, Tahoes and pickups. Wish they had the same connections though.

Save 14% Off

Great sounding replacement speakers for my GMC truck. Don't want to spend a bundle on a better sound system for your old truck, these are the replacement speakers for you.

1 pair Car H7 4300K (white) HID Xenon bulbs lights lamps (single beam)

So I ordered the wrong type of bulbs and they took them right back and worked with me on getting the right ones and they sent me the right size... but when put one in, it looked just like the 5000k I had on the other lamp.

I called them up and explained how I know that they are not 4300k. and wanted to send them back to get 4300k. well they called me back the next day and explained to me that when someone orders 4300k they send out 5000k because they are the same.

well if ther were the same they would both be called 5000k. PEOPLE, they are NOT the same one burns at 4300k temp and the other at 5000k temp. 4300k looking super OEM, what I call crystal white and 5000k leaning toward blue with a light blue hue.

bottom line

Pro: Happy they worked with me

Con: Got the wrong bulb and no on that part.

Save 30% Off

BESTEK 120w charger dc ac power inverter car dc 12v to 110v car adapter usb charger car samsung ada

This inverter was carried by my daughter's miniature horse in a local Parade of Lights. It powered 3 strings of LED lights using 8 AA cells, it powered the lights for an hour which indicates the inverter was very efficient at this load level. The power cord plugs into the inverter and is keyed to prevent reverse polarity. I had to cut the power cord to solder it to the battery holder. It was about 20 degrees out and worked fine. I will be ordering more of them as my daughter has a horse business and the parade makes for good advertising.

This Item was perfect for the application I used it for. I used it to light a small Christmas Tree for our Football tail gate. It was on for at least three hours and did not drain the battery on the car at all. It also shipped withn three days.

Buy BESTEK 120w charger dc ac power inverter car dc 12v to 110v car adapter usb charger car samsung ada Now

This was a sturdy, quality product and they delivered quickly. I had no problems and the device worked great. Not too bad of a price either.

Read Best Reviews of BESTEK 120w charger dc ac power inverter car dc 12v to 110v car adapter usb charger car samsung ada Here

Very small yet effective. Powered my 19" tv and DVD player plus charged my phone and Ipod all at once on a 5 hour road trip

Want BESTEK 120w charger dc ac power inverter car dc 12v to 110v car adapter usb charger car samsung ada Discount?

If you want a very small device to power a Laptop, IPOD or any other device via AC power (120W) or USB through the cigarette lighter in your car, this is the product.

Save 63% Off

Morningstar SunSaver SS-10-12v Charge Controller 10A 12V

May 19 , 2013 update. Same panels, same batteries, same charger. All is well. Fridge died , but controller is still doing the job.If you battery(s) are worth more than $25 this is probably the best cheapest controller. If you buy a cheap controller, you need to check what is happening with a volt meter. The cheap ebay controllers i tested are not good.

2 years ago-This is an update after 5 months of constant use in Baja california. I run a 12volt refer and the lights to a small house.

Testing with a watt meter:

Watt meter between charger and battery. my panels

( 320 year old 50 watt panels) had at least a peak wattage of 130 (9.5 amps) watt on a sunny day, and hit 200 watts on some partly cloudy days. So the unit was pushed to the max, and held up well. Wattage to a fully charged battery was 5-8 watts. There was no heat coming from the unit. Would up my rating 5 stars. Therefore the following review should be changed in spots, but I'll leave it for now.

How Morningstar Sunsaver ss-10 works and the potential flaw.

Assuming temperature 25 degrees C: the controller will put a voltage of 14.4v into the battery. With no load on the system, and sun, a voltmeter will always read 14.4v no matter what state of charge the battery is in. This is just what my battery type wantsconstant voltage. So far great.

But when the battery is fully charged , the float voltage does not go down to around 13.7v. The float voltage is 14.4v. After 2 days of charging, an analog amp meter shows zero current going into the battery. however my 0-25a meter is accurate at best to + 1 amp. So maybe a float voltage of 14.4v is ok? Provided the current is very low. My batteries (expensive) call for a float votage of 13.2v to 13.7v. I'll know more when I get a digital amp meter.

I can't find any specs from Morningstar on how much current is going into a fully charged battery.

It's just sort of dissapointing that I spent the extra money for a name brand, and may have ended up with an inferior product. If I had known the float voltage was 14.4v, I would not have purchased. Especially with no specs on current at the float voltage. If I hadn't modified the mounting holes , I would return it. Now I'm left with the problem of finding out the current myself, and then babysitting the thing so my batteries don't overcharge.

The temperature sensor works well.

Correction. I started out with an 85% charged battery. I do not know what the initial charging battery voltage would be if I had started out with a more discharged battery. Probably would depend on % battery charge and output of solar panels. Float voltage still 14.4v.

Update. I bought a 10 amp controller that looks identical to the HQRP 10a. Was not purchased from amazon. Was 20 bones delivered.

That controller is way way worse than the sunsaver. It starts the day on a fully charged battery and enters an equilization phase. Battery voltage is brought up to

16 plus volts then shut off until voltage goes down to 14.4v. Then the full power of the panels ( 6 amps in my case)is put into the battery until voltage goes to 16 plus again. This went on for an hour until I pulled its plug. Next day same thing. I'm not sure what kind of battery likes this treatment. Not gel and not my AGM. Would be ok for an old car battery you don't care about. So for under 60 bucks the morningstar may be as good as you can get.

I've put a switch on the morningstar and can lower the float voltage to 14.1v. I think I can live with that. Or maybe go back to the nc25a I was using.

I have no use for the load contols on these controllers. I'm not lighting a street lamp. My main use is running a fridge/freezer, that shuts down when batteries are below 12 volts. I would be happy if the manufacture left out the load feature and just spent the savings to make a charger that correctly charged the battery.

The Morningstar SunSaver Charge controllers do the job.

My solar system is for a weekend cabin that is mostly used during the summer and autumn.

But be careful in hooking up; I damaged one when I inadvertently shorted a connection.

Another one was damaged when mice built a nest on top of the controller and it overheated.

Buy Morningstar SunSaver SS-10-12v Charge Controller 10A 12V Now

The unit is well engineered,and maufactured.There is no way one could install product wrong.The risk of short circuiting is practically impossible,as there are tall walls between the terminals.It is epoxy encapsulated and therefore waterproof.The backplate is constructed in such a way as to insure ventillation,minimizing heat buildup.I would definetly recommend this unit.

Read Best Reviews of Morningstar SunSaver SS-10-12v Charge Controller 10A 12V Here

This was the exact replacement for my solar panel controller on my RV.

Have had it for several months and it is working like new.

Want Morningstar SunSaver SS-10-12v Charge Controller 10A 12V Discount?

excellent product! works perfectly with my 90watt solar panel.

Ive got this hooked up to 3 105ah marine batteries to use as an emergency power back up.

super easy to install and has worked flawlessly since i bought it.

the price would be the only con in my opinion.

Save 8% Off

Chamberlain CLULP1 Universal Laser Garage Parking Assist

I installed 2 of these units in my garage and am reasonably satisfied with them. My biggest complaint is that the laser dot should be brighter. When entering the garage on a bright summer day it is difficult to see the dot. One of my cars is silver and the other is dark gray. I can't see the dot until it hits my dash which is black in both cars.

The installation was extremely straightforward since the units were attached to a Chamberlain system. One potential "gotcha" is that the wiring that comes with the unit is too short for most garages. You will likely need to buy some additional two conductor wire and spice it to the end of the existing wire.

These units can be used with non-Chamberlain systems or for that matter in a garage without any opener system. Each unit is supplied with a plug in the wall AC adaptor. With the unit attached to the adaptor, the laser stays on all the time. Obviously, I can't comment about how long the unit would last when set up this way.

I bought this unit thinking how could I go wrong with a Chamberlain product. I was wrong, this product is simply a waste of time and money. The laser beam is so small and weak that it's nearly impossible to see and even harder to adjust. I played with it for several hours trying to get the beam to stay in one place long enough to test it. I have it firmly mounted to my ceiling and it moves by itself when trying to adjust it. Then once it's close to where you want it, the beam is so small and weak that you can't see it unless the car is stopped. I would not recommend spending the money on this prodct. There are many more garage parking assist products that work much better and are cheaper.

Buy Chamberlain CLULP1 Universal Laser Garage Parking Assist Now

Don't use those annoying looking "tennis balls" hanging from the ceiling! get this laser parking assist to give your garage that clean sleek look it used to have.

I bought this and installed it on my Chamberlain 3/4 HP Whisper Drive in about 5 minutes. It comes with wires and a power plug. If you are using this with a Chamberlain, you will not need to connect the power plug. All you do is connect 2 wires onto the quick connect plugs on the garage opener that control the safety sensor and that's it.

When you open the garage door, and walk pass the eyes, the laser comes on. The laser shuts off after awhile but once you walk pass the sensors again, the laser comes on. This is perfect if you leave your garage door open, leave and come back. It will trigger the laser no matter what goes through the garage.

The light pulsates and you point and adjust it to where you want it to beam. I wish it was brighter, but it works.

Easy to install, cheap, and works great. I recommend it.

Read Best Reviews of Chamberlain CLULP1 Universal Laser Garage Parking Assist Here

We added these to a Genie screw driver opener, but really if you don't have a Champerlain opener with the dedicated input for these laser lights then all installs will be the same. Your objectives is to:

a. Mount each light on the ceiling with a single screw. We mounted two lights because we had two parking spaces in our garage.

b. Run the wires to the garage door opener control head. We chose to run the wire up through the ceiling and into the crawl space above, and then drill a single 1/4 hole above the door opener and drop them down to the opener through this hole. If you drill the holes at the light end, where the middle of the light will be when mounted, then the wires won't show. A much cleaner installation for very little extra effort.

c. Attach the wires to one of your openers bulb socket so the laser lights go on/off with the garage door opener when you open/close the door, and off when the lights automatically turn off. This is made easy by buying a lamp socket to 110v two prong outlet adapter (about 80 cents at the hardware store), taking out one of the bulbs, screwing in the adapter, connect the wires from the laser lights to a single 110v adapter, and then plug this adapter into the outlet adapter. To keep the same level of light in the garage I replaced the 40 watt incandescent bulb with a 75 watt equiv florescent bulb in the one remaining lamp socket. At this point if you open/close the door you'll see the lasers pulsating (blinking).

d. This is the hardest part. Park your cars exactly where you want them in the garage. Now, aim the laser at a point on your dashboard which is easy to see. The movements are sensitive so this takes time.. but once set it's permanent and will only need to be done again when/if you change your car or the position you want it parked. We chose a spot on the middle of the top dash pad exactly in the middle so as we pull the car in we can watch it "walk" it's way up the dash and to the location we want.

e. Be sure to explain to all drivers how things work. For instance, if the garage door remains open and the lights time out the lasers will go off.. so if the door is open and the car outside, you sweep out the garage or whatever leaving the door open.. then when you put the car inside the laser will not be on. Someone just might keep going forward looking for that light to go on, far enough to hit something in front of the car. :)

Want Chamberlain CLULP1 Universal Laser Garage Parking Assist Discount?

Great idea, however the projected dot is too small and not bright enough to be able to see. If they made one with some power I would snap it up, until then save your money.

Save 27% Off

DieHard 71219 Battery Charger / Maintainer for 6 & 12-Volt Batteri

I bought this primarily for use as a maintainer for a vehicle that is seldom driven, but that I did'nt want to have to jump start, or remove and charge the battery every time I needed/wanted to start the car. This charger/maintainer works well for my needs.

I keep my battery in the cobra which I don't drive very much. I had one before this one nd it quit working so

jst replaced it.

Buy DieHard 71219 Battery Charger / Maintainer for 6 & 12-Volt Batteri Now

DieHard 71219 Battery Charger / Maintainer for 6 & 12-Volt Battery does not

function properly. It fails to analyze the 12 V battery and charge it.

Read Best Reviews of DieHard 71219 Battery Charger / Maintainer for 6 & 12-Volt Batteri Here

OEM Sprint Micro USB Rapid Car Vehicle Auto Plug in Battery Charger + Home Wall Travel Charger for

oem sprint micro usb rapid car vehicle auto plug in charger is exactly what i wanted plus i didnt realize you cab charge two items at once

Excellent just adding filler cause you have to have 30 words so just a few more and I am done

Buy OEM Sprint Micro USB Rapid Car Vehicle Auto Plug in Battery Charger + Home Wall Travel Charger for Now

I really enjoy this charger. Not only can I charge my phone, but I can also charge my friend's phone by simply changing the USB cord. Only needing one charger for home and car is a great investment for anyone.

Read Best Reviews of OEM Sprint Micro USB Rapid Car Vehicle Auto Plug in Battery Charger + Home Wall Travel Charger for Here

The usb stopped working after 3 days so I'm not happy with this purchase..! I was not satisfied at all

Want OEM Sprint Micro USB Rapid Car Vehicle Auto Plug in Battery Charger + Home Wall Travel Charger for Discount?

Mini 10W Car / Auto DC Charger for the Philips GoGear HDD6330 with Gomadic Brand Power Sleep techno

• Gomadic TipExchange Technology protects your investment by providing a means to change/upgrade your charger by simply swapping the physical charging tip. (Charging tip for Philips GoGear HDD6330) included with additional tips sold separately)
• Intelligent circuit provides precise output voltage and resistor configuration specific to the Philips GoGear HDD6330. This ensures battery is safely and efficiently charged without affecting battery longevity.
• Charger provides a full 10W (2,000mAh) of available current in a small form factor a little over 1 inch long. Flexible, straight cable measure 50 inches in total length.
• Power Sleep"" feature will cut power draw of charger by over 99% when not in use. Charger will draw less than 0.1W of power when in ""ready state"" (e.g. not connected to the Philips GoGear HDD6330).
• Backed by the Gomadic Lifetime Warranty. This is a quality product that is built to be the last car charger you ever buy!

Product works great and does seem to charge faster than the wall charger that came with my device. I have used it numerous times and do not have any complaints.

Save 34% Off