DB Link RTG0 0-Gauge Gold Ring Terminal

• Gold Ring Terminal
• Clear, Heat-Resistant
• Plastic Housing
• 0 Gauge

I've purchased a few DB Link wiring products, and I've been happy with them all for the price. For these, I'm very happy. They fit some Monster single aught (1/0) cable perfectly. Well, mine had very thick insulation like 1/4 inch but the wire itself fits perfectly. I just had to trim the insulation down a little. Normal wire would probably fit very nicely (there's a little space at the end where the insulation will fit inside the connector for a clean look). The set screw uses a reasonably large allen wrench, so I felt confident that I was getting it cranked down solidly and making a good connection. These feel reasonably substantial, and the ring terminal is offset some on the body so it will work well with different clearance situations. I think the hole was .25", but now I don't remember if it was 5/16 or 1/4. I'll go measure it later and update the review. Maybe I'll take some pictures, too. :)

Otherwise, I feel that I should note that the ad doesn't make it clear if you get 1 or 2. You get two, one with black print and one with red. I only used one, and was happy with the price at that point; two is a pretty good bargain, I think. If I need more of these kinds of things, I'll definitely look to DB link as a viable option.

Buy DB Link RTG0 0-Gauge Gold Ring Terminal Now

These ring terminals fit the 0 gauge wire great. The finish on them is nice lood just like the picture. My fuse holder had to be modified a little bit the cover would not snap into place all the way but it was worth it just for the look.

Read Best Reviews of DB Link RTG0 0-Gauge Gold Ring Terminal Here

These are very good quality terminals for 0 gauge wire. I didn't have the proper tools to crimp a large wire properly so I decided to buy these instead. They are a bit pricey, but work fantastically.

Want DB Link RTG0 0-Gauge Gold Ring Terminal Discount?

these work great awesome product

used them to hook the wires to the side post of the battery nice tight fit

Save 18% Off

So I purchased 3 packs, so a total of 6 terminals. I used them to do the Big 3 Upgrade. They way you crimp the 1/0 Wire is easy to do and works very well. What I disliked was that if your using them to ground a wire you need to put 2 washers so that you can get the best contact possible. In my opinion that is a big flaw. The area were the bolt goes in the back part its not flush with the rest of the back of the terminal and that's why you need washers. Do I regret getting them no