Saturday, November 30, 2013

Tripp Lite PV1000HF PowerVerter Ultra-Compact Inverter 12V to 120VAC 1000 Watts (4) 5-15R Outlets

Tripp Lite PV1000HF PowerVerter Ultra-Compact Inverter 12V to 120VAC 1000 Watts 5-15R Outlets
  • PowerVerter Ultra-Compact Inverter, portable power for all applications
  • 1000 watts continuous output power; up to 2000 watts instantaneous power
  • 4 AC outlets; rugged all-metal housing
  • Automatic shutdown feature prevents battery drain
  • 1-year warranty

This is the 2nd inverter(returned 1st one for same reason). Supposed to put out 110 to 120 volts but output is only 90 volts with 13 volt imput and no load. This time I ordered a Xantrex pure sine wave inverter.

Buy Tripp Lite PV1000HF PowerVerter Ultra-Compact Inverter 12V to 120VAC 1000 Watts (4) 5-15R Outlets Now

Unit was as I expected it to be easy instalation easy to use no problems with seller or unit I am a happy locksmith

Read Best Reviews of Tripp Lite PV1000HF PowerVerter Ultra-Compact Inverter 12V to 120VAC 1000 Watts (4) 5-15R Outlets Here

I have used or been familiar with Tripp-Lite products for many years, from revolving emergency lights to surge-suppressing power strips to this fine product and others. I have never once been disappointed. I have not yet exercised it to its maximum capacity but would recommend it for anyone.

P.S. I saw a post somewhere in which a gentleman referred to the output voltage being low. As a point of information, the voltage reading will not always indicate like typical line voltage because of the pseudo-sine wave output and depending on the meter that is used (digital dual-slope integration vs analog vs cheap vs technical level of experience) to acquire the reading.

Want Tripp Lite PV1000HF PowerVerter Ultra-Compact Inverter 12V to 120VAC 1000 Watts (4) 5-15R Outlets Discount?

To be fair, I am not an electrician. I am a programmer. But after studying different small-scale solar installations, I decided to go with this inverter because it came recommended by Mother Earth News.

After hooking everything up per instructions, I can successfully turn the lights on, then the radio, then a battery charger for my cordless drill.

But, if I try to start my radio, then turn the lights on, the on-board breaker pops on this inverter. It is really getting annoying.

I am also only getting 89VAC out and no load. It's like this thing can't handle any kind of load.

I'm sending this back.

No comments:

Post a Comment