Matched perfectly from the Tundra wiring harness to the controller. Very simple to mount and hook up and would recommend.
Ordered this adapter to hook up a Tekonsha P3 brake controller on my 2005 Toyota Sequoia. Knew I was looking for a connector somewhere under the panel near the parking brake. Removed the panel and looked high and low in this tight space for a connector that would fit with no success. As I was about to give up and go to a dealer I noticed a possible connector which was mostly hidden under black electrical tape used to attach it to other wires. Removed the electrical tape from this bundle and sure enough there was a connector that looked like it would almost fit. Realized there was a blank part attached to the connector and once I removed it, my wiring adapter clicked nicely into place. Attached my P3 brake controller in the indent to the right of the steering column on my Sequoia and plugged in the wire to the back of my brake controller. Great to see it light up and it appears to be operating as advertised. Word to the wise. Look under the black electrical tape for the connector and save yourself a bunch of time.
Buy Tekonsha 3040 2-Plug Brake Control Wiring Adapter for Toyota Now
I used this on a 2005 Tundra Tradesman long bed truck. Plugged into a Tekonsha Primus (should fit any Tekonsha controller). The length was fine to mount under the dash to the right of the steering wheel.
Read Best Reviews of Tekonsha 3040 2-Plug Brake Control Wiring Adapter for Toyota Here
Made hooking up our trailer brakes very easy. The thing that took the longest was finding the pigtail on the 4Runner. Works great.
Want Tekonsha 3040 2-Plug Brake Control Wiring Adapter for Toyota Discount?
Received this and it was better than expected. wites were all covered in black mesh and look very profesional. cannot see wires after they are installed. works great with my P3 controler.
Save 16% Off
No comments:
Post a Comment