PhilI ordered 2 of these, one for myself and one for a friend. We needed this style of gauge to check the air pressure on our motorcycles with dual front disk brakes. Unfortunaltely both of them have failed. Mine worked for a few times accurately, but suddenly began to read about 40 psi above the actual pressure. I unsuccessfully tried to reset the gauge by removing the battery. The other gauge never worked properly. It shows all '7's every time you try to use it. I have since replaced my gauge with one bought at Wally World. It is marketed by Slime and has a short hose for reaching in tight places, has a back light, and several other useful features and costs less than the Accutire units.
Buy Accutire MS-4710B Motorcycle 5-99 PSI Digital Tire Gauge Now
I read the reviews before purchasing two of these. One for me, one for my brother. We're both motorcyclists and it's a pain to check pressure with a pencil gauge, and you should check your pressure before every ride. One of the two I received leaked air internally immediately and gave false readings. I returned that one and got a replacement. This one stopped working after about 4 uses. I fiddled with the batteries but it was still dead. I smashed it to bits. I'm afraid to ask if my brothers works. The price was great and the unit felt good in my hand but like so many others that bought these they just don't work. Do not buy one !!!Read Best Reviews of Accutire MS-4710B Motorcycle 5-99 PSI Digital Tire Gauge Here
Using this on a 2005 Roadstar. It is possible to use on the rear only if you bend the (small/stubby, straight) valve stems over a bit. Still hard to get a good seal every time. Gauge reads fine when you get a good seal however. Would like to see a gauge with a 100-110 degree head. Just a bit of a bend to avoid the brake rotors and still fit the stem.Rating: pretty good gauge, bit bulky and won't fit all bikes. Recommended with reservations.
Want Accutire MS-4710B Motorcycle 5-99 PSI Digital Tire Gauge Discount?
Much easier to maneuver around the disk brake rotors and wheel spokes than other digitals made for the automotive industry. Mine did seem to hang up now and then when trying to remove it from the valve stem, but its not that big of a deal. Probably wouldn't do that if the end barrel was polished metal inside. Instead it's two molded plastic pieces as an extension of the handle pieces.
No comments:
Post a Comment