- Advance features for VW, Audi, Seat & Skoda.
- Basic features (read, erase, freeze frame data.) for all other OBD2 & CAN-BUS vehicles.
- Read & erase trouble codes & reset service lights. It will perform these functions on engine, ABS, Airbags, transmission, radio, climate control, instruments, immobilizer & more.
- Turns off MIL Lights: engine, airbag, ABS, transmission & most other systems.
- Resets the Oil Service Light. etc
Buy Car Code Reader Scanner VW/AUDI SCAN TOOL MAXSCAN VAG405 VAG 405 OBD II OBD 2 EOBD2 Now
You need this reader to clear codes. You can unhook the battery , but that will not clear the stored codes in your ECU. They will reappear in time. This is a very valuable tool to use. Well worth the cost. If you use a generic code reader that is not a VAG reader you will only read generic codes for OBD II systems. This reads Volkswagen codes specific to Volkswagen products. A VAG reader is the only way to permanently clear the codes.I am a mechanic and trust me you will be chasing pink elephants unless you get this diagnostic code reader. This will save you the cost of guessing at what sensor is bad and needs to be replaced.I bought a used 2003 vw jetta with check-engine, airbag light on. Upon inspection, I was told the airbag module needed replacement and a ton of other things for the check engine. I decided to get this device to see for myself as I enjoy researching such things. I found an easy do-it-myself solution for the airbag thanks to the code provided by this device. I also got the code as it related to the check engine and made the repairs. This device saved my $1000s already and worked exactly as stated. It is very easy to use and follow the on screen instructions to get the job done. I would highly recommend it to anyone who wants to know what is really wrong with the car and not have to deal with mechanics adding items to your bill for no reason.Want Car Code Reader Scanner VW/AUDI SCAN TOOL MAXSCAN VAG405 VAG 405 OBD II OBD 2 EOBD2 Discount?
This scanner is obsolete and can not even be up dated. I hooked our A4 Audi up to it and it would not even connect up to most of the "CAN" network. Don't waste your money on this and find a good scanner or a "real" VAGCOM software.This reader worked great on my VW . They were going to charge me $350 to put the glow plugs in the car. I purchased the glow plugs and the reader for under $100 and did it myself in 30 minutes.
No comments:
Post a Comment