Cobra Hard Wire Kit for Cobra Radar Detectors

• 14-Band detection--detects 7 radar, 6 laser and 1 safety signal
• Provides complete immunity to VG-2 and alerts for Spectre I/IV radar detector-detectors
• LaserEye provides 360-degree detection of laser signals
• One-year limited warranty
• UltraBright data display provides easy recognition of band detected by use of band identification icons

I decided to buy this because in my car (thanks to the location of the cigarette lighter) it was impossible to use the shorter, springy power cord that came with the radar detector. The instructions are simple (available online at , also pasted below), and what really took me the longest was finding the right fuse to use and then a ground screw to connect the other terminal. But that's really more a function of your car than of the product. Once I got that sorted out the rest was easy and it works and looks great!

INSTRUCTIONS (from Cobra website at ):

1. Connect the fused wire to a fuse in the fuse box. The fuse for the radio is recommended. To connect the wire to a blade-type fuse, it is recommended to use a fuse tap available from Radio Shack. Part number 270-1204 for standard blade fuses, or part number 270-1218 for mini-blade fuses.

2. Plug the cable into the radar detector and turn on the detector.

3. Turn on the ignition.

4. Touch the other wire to various screws under the dash. When the detector turns on, you have found a ground screw. Attach the wire to this screw.

5. Carefully run the cable to the detector, avoiding the brake and gas pedals.

This completes installation.

Buy Cobra Hard Wire Kit for Cobra Radar Detectors Now

ample amount of wire and simple install, one suggestion that most places don't suggest is wiring it into your fuse box under the dash, simply find an accessory fuse plug and push the wires into the pins with a fuse of the proper size. Then run up the molding and in tuck in the headliner.

Read Best Reviews of Cobra Hard Wire Kit for Cobra Radar Detectors Here

Quality cable, exactly what I needed. After the cig adapter broke from my original Cobra purchase, I decided to hard-wire it this made it possible!

Want Cobra Hard Wire Kit for Cobra Radar Detectors Discount?

This wire kit was just what I needed to get my Cobra Radar Detector up out of the way on my windshield. I now have mine mounted just to the right of the rearview mirror. I didn't want to cut the original power cord so I can still use it in another vehicle. The kit wire is very thin and easy to tuck under interior trim to hide the wire. I wired mine to the accesory fuse so it turns on and off with the ignition. loved getting that wire off my dash and opening up my outlet again.

I was able to hardwire my Cobra radar detector in about an hour. Works great and the wires are small enough to fit in the ceiling of my car without taking it off. Makes for simple installation. The wire reaches from my mirror all the way down to my fuse box with plenty of slack. Highly recommend.