Pyle PLMPA35 2-Channel 300-Watt Mini Amplifier with 3.5mm Input

• 2 Channel IC Mini Amplifier with 3.5mm Input Plug2 x 15 Watts RMS @ 4 Ohms/ 2 x 150 Watts Peak - T.H.D. 1% - Size: 3.94''L x 2.99''W x 1.4''H
• 3 way Selectable Electronic Crossover Network - 4 Ohm Stereo Stable
• Adjustable Gain Control - Anti-Thump Turn On
• 3.5mm / 1/8" Stereo Audio Inputs - Soft Turn On/Off
• Power Protection Circuitry - Dc: 12-14.8 Volt

I bought this product to use as a radio for my 4 wheeler. Very small and compact...just what I needed to fit inside a piece of PVC pipe. Sounds great hooked up to two speakers and two tweeters. Easy to set up. The orange wire has to wired to hot wire to power it. So far a good product!

Buy Pyle PLMPA35 2-Channel 300-Watt Mini Amplifier with 3.5mm Input Now

Small but perfect for my side by side. Would work well on a motorcycle. Instructions could be better. The orange wire has to be hooked up to a hot wire to turn unit on. I would buy it again

Read Best Reviews of Pyle PLMPA35 2-Channel 300-Watt Mini Amplifier with 3.5mm Input Here

Pyle lies about the power specifications and Amazon won't correct it. This is a bridged amplifier driven off 12VDC power. Estimate: (14.4V battery 2V loss) / 4 Ohms = 38.4W peak. RMS is less than 1/2 peak, so 15W RMS is correct.

Want Pyle PLMPA35 2-Channel 300-Watt Mini Amplifier with 3.5mm Input Discount?

I hooked this up to my motorcycle battery just like the diagrams provided shows and it blew its fuse. I thought that maybe the speakers I was using were too powerful for the amp, so I disconnected them from the amp, replaced the fuse with a new one, and hooked it up to the battery again. And again it blew the fuse. Since there wasn't anything else connected to it I am assuming this amp had a problem in side it somewhere.

Save 67% Off

The unit did exactly what I expected. Cannot figure their math to come up with 300 watts though and yes I would like to know! Is it the new math or what?